Trigger event loop more intelligently and automatically in libvitastor_c

2025-03-02 18:04:56 +03:00
77 changed files with 272 additions and 1072 deletions
@@ -2,6 +2,6 @@ cmake_minimum_required(VERSION 2.8.12)

 project(vitastor)

-set(VITASTOR_VERSION "2.0.0")
+set(VITASTOR_VERSION "1.11.0")

 add_subdirectory(src)
@@ -6,7 +6,7 @@

 Вернём былую скорость кластерному блочному хранилищу!

-Vitastor - распределённая блочная, файловая и объектная SDS (программная СХД), прямой аналог Ceph RBD, CephFS и RGW,
+Vitastor - распределённая блочная и файловая SDS (программная СХД), прямой аналог Ceph RBD и CephFS,
 а также внутренних СХД популярных облачных провайдеров. Однако, в отличие от них, Vitastor
 быстрый и при этом простой. Только пока маленький :-).

@@ -46,7 +46,6 @@ Vitastor поддерживает QEMU-драйвер, протоколы NBD и
  - [OpenNebula](docs/installation/opennebula.ru.md)
  - [OpenStack](docs/installation/openstack.ru.md)
  - [Kubernetes CSI](docs/installation/kubernetes.ru.md)
-  - [S3](docs/installation/s3.ru.md)
  - [Сборка из исходных кодов](docs/installation/source.ru.md)
 - Конфигурация
  - [Обзор](docs/config.ru.md)
@@ -6,7 +6,7 @@

 Make Clustered Block Storage Fast Again.

-Vitastor is a distributed block, file and object SDS, direct replacement of Ceph RBD, CephFS and RGW,
+Vitastor is a distributed block and file SDS, direct replacement of Ceph RBD and CephFS,
 and also internal SDS's of public clouds. However, in contrast to them, Vitastor is fast
 and simple at the same time. The only thing is it's slightly young :-).

@@ -46,7 +46,6 @@ Read more details in the documentation. You can start from here: [Quick Start](d
  - [OpenNebula](docs/installation/opennebula.en.md)
  - [OpenStack](docs/installation/openstack.en.md)
  - [Kubernetes CSI](docs/installation/kubernetes.en.md)
-  - [S3](docs/installation/s3.en.md)
  - [Building from Source](docs/installation/source.en.md)
 - Configuration
  - [Overview](docs/config.en.md)
@@ -1,4 +1,4 @@
-VITASTOR_VERSION ?= v2.0.0
+VITASTOR_VERSION ?= v1.11.0

 all: build push

@@ -49,7 +49,7 @@ spec:
            capabilities:
              add: ["SYS_ADMIN"]
            allowPrivilegeEscalation: true
-          image: vitalif/vitastor-csi:v2.0.0
+          image: vitalif/vitastor-csi:v1.11.0
          args:
            - "--node=$(NODE_ID)"
            - "--endpoint=$(CSI_ENDPOINT)"
@@ -121,7 +121,7 @@ spec:
            privileged: true
            capabilities:
              add: ["SYS_ADMIN"]
-          image: vitalif/vitastor-csi:v2.0.0
+          image: vitalif/vitastor-csi:v1.11.0
          args:
            - "--node=$(NODE_ID)"
            - "--endpoint=$(CSI_ENDPOINT)"
@@ -5,7 +5,7 @@ package vitastor

 const (
    vitastorCSIDriverName    = "csi.vitastor.io"
-    vitastorCSIDriverVersion = "2.0.0"
+    vitastorCSIDriverVersion = "1.11.0"
 )

 // Config struct fills the parameters of request or user input
@@ -1,4 +1,4 @@
-vitastor (2.0.0-1) unstable; urgency=medium
+vitastor (1.11.0-1) unstable; urgency=medium

  * Bugfixes

@@ -3,7 +3,7 @@
 FROM debian:bookworm

 ADD etc/apt /etc/apt/
-RUN apt-get update && apt-get -y install vitastor udev systemd qemu-system-x86 qemu-system-common qemu-block-extra qemu-utils jq nfs-common && apt-get clean
+RUN apt-get update && apt-get -y install vitastor qemu-system-x86 qemu-system-common qemu-block-extra qemu-utils jq nfs-common && apt-get clean
 ADD sleep.sh /usr/bin/
 ADD install.sh /usr/bin/
 ADD scripts /opt/scripts/
@@ -1,4 +1,4 @@
-VITASTOR_VERSION ?= v2.0.0
+VITASTOR_VERSION ?= v1.11.0

 all: build push

@@ -7,8 +7,8 @@ PartOf=vitastor.target
 [Service]
 Restart=always
 EnvironmentFile=/etc/vitastor/docker.conf
-ExecStart=bash -c 'docker run --rm -i -v /etc/vitastor:/etc/vitastor -v /dev:/dev -v /run:/run \
-    --security-opt seccomp=unconfined --privileged --pid=host --log-driver none --network host --name vitastor vitastor:$VITASTOR_VERSION \
+ExecStart=bash -c 'docker run --rm -i -v /etc/vitastor:/etc/vitastor -v /dev:/dev \
+    --privileged --log-driver none --network host --name vitastor vitastor:$VITASTOR_VERSION \
    sleep.sh'
 ExecStartPost=udevadm trigger
 ExecStop=docker stop vitastor
@@ -12,8 +12,7 @@ EnvironmentFile=/etc/vitastor/docker.conf
 SyslogIdentifier=vitastor-osd%i
 ExecStart=bash -c 'docker run --rm -i -v /etc/vitastor:/etc/vitastor -v /dev:/dev \
    $(for i in $(ls /dev/vitastor/osd%i-*); do echo --device $i:$i; done) \
-    --log-driver none --network host --ulimit nofile=1048576 --ulimit memlock=-1 \
-    --security-opt seccomp=unconfined $CONTAINER_OPTIONS --name vitastor-osd%i \
+    --log-driver none --network host --ulimit nofile=1048576 --ulimit memlock=-1 $CONTAINER_OPTIONS --name vitastor-osd%i \
    vitastor:$VITASTOR_VERSION vitastor-disk exec-osd /dev/vitastor/osd%i-data'
 ExecStartPre=+docker exec vitastor vitastor-disk pre-exec /dev/vitastor/osd%i-data
 ExecStop=docker stop vitastor-etcd%i
@@ -4,7 +4,7 @@
 #

 # Desired Vitastor version
-VITASTOR_VERSION=v2.0.0
+VITASTOR_VERSION=1.11.0

 # Additional arguments for all containers
 # For example, you may want to specify a custom logging driver here
@@ -13,7 +13,6 @@ affect their interaction with the cluster.
 - [client_retry_interval](#client_retry_interval)
 - [client_eio_retry_interval](#client_eio_retry_interval)
 - [client_retry_enospc](#client_retry_enospc)
- [client_wait_up_timeout](#client_wait_up_timeout)
 - [client_max_dirty_bytes](#client_max_dirty_bytes)
 - [client_max_dirty_ops](#client_max_dirty_ops)
 - [client_enable_writeback](#client_enable_writeback)
@@ -71,19 +70,6 @@ and clients are not blocked and just get EIO error code instead.
 Retry writes on out of space errors to wait until some space is freed on
 OSDs.

-## client_wait_up_timeout
-
- Type: seconds
- Default: 16
- Can be changed online: yes
-
-Wait for this number of seconds until PGs are up when doing operations
-which require all PGs to be up. Currently only used by object listings
-in delete and merge-based commands ([vitastor-cli rm](../usage/cli.en.md#rm), merge and so on).
-
-The default value is calculated as `1 + OSD lease timeout`, which is
-`1 + etcd_report_interval + max_etcd_attempts*2*etcd_quick_timeout`.
-
 ## client_max_dirty_bytes

 - Type: integer
@@ -13,7 +13,6 @@
 - [client_retry_interval](#client_retry_interval)
 - [client_eio_retry_interval](#client_eio_retry_interval)
 - [client_retry_enospc](#client_retry_enospc)
- [client_wait_up_timeout](#client_wait_up_timeout)
 - [client_max_dirty_bytes](#client_max_dirty_bytes)
 - [client_max_dirty_ops](#client_max_dirty_ops)
 - [client_enable_writeback](#client_enable_writeback)
@@ -73,19 +72,6 @@ RDMA и хотите повысить пиковую производитель
 Повторять запросы записи, завершившиеся с ошибками нехватки места, т.е.
 ожидать, пока на OSD не освободится место.

-## client_wait_up_timeout
-
- Тип: секунды
- Значение по умолчанию: 16
- Можно менять на лету: да
-
-Время ожидания поднятия PG при операциях, требующих активности всех PG.
-В данный момент используется листингами объектов в командах, использующих
-удаление и слияние ([vitastor-cli rm](../usage/cli.ru.md#rm), merge и подобные).
-
-Значение по умолчанию вычисляется как `1 + время lease OSD`, равное
-`1 + etcd_report_interval + max_etcd_attempts*2*etcd_quick_timeout`.
-
 ## client_max_dirty_bytes

 - Тип: целое число
@@ -7,8 +7,8 @@
 # Runtime OSD Parameters

 These parameters only apply to OSDs, are not fixed at the moment of OSD drive
-initialization and can be changed - in /etc/vitastor/vitastor.conf or [vitastor-disk update-sb](../usage/disk.en.md#update-sb)
-with an OSD restart or, for some of them, even without restarting by updating configuration in etcd.
+initialization and can be changed - either with an OSD restart or, for some of
+them, even without restarting by updating configuration in etcd.

 - [osd_iothread_count](#osd_iothread_count)
 - [etcd_report_interval](#etcd_report_interval)
@@ -61,8 +61,6 @@ with an OSD restart or, for some of them, even without restarting by updating co
 - [recovery_tune_agg_interval](#recovery_tune_agg_interval)
 - [recovery_tune_sleep_min_us](#recovery_tune_sleep_min_us)
 - [recovery_tune_sleep_cutoff_us](#recovery_tune_sleep_cutoff_us)
- [discard_on_start](#discard_on_start)
- [min_discard_size](#min_discard_size)

 ## osd_iothread_count

@@ -318,7 +316,7 @@ for hot data and slower disks - HDDs and maybe SATA SSDs - but will slightly
 decrease write performance for fast disks because page cache is an overhead
 itself.

-Choose "directsync" to use [immediate_commit](layout-cluster.en.md#immediate_commit)
+Choose "directsync" to use [immediate_commit](layout-cluster.ru.md#immediate_commit)
 (which requires disable_data_fsync) with drives having write-back cache
 which can't be turned off, for example, Intel Optane. Also note that *some*
 desktop SSDs (for example, HP EX950) may ignore O_SYNC thus making
@@ -631,16 +629,3 @@ are changed to 0.

 Maximum possible value for auto-tuned recovery_sleep_us. Higher values
 are treated as outliers and ignored in aggregation.
-
-## discard_on_start
-
- Type: boolean
-
-Discard (SSD TRIM) unused data device blocks on every OSD startup.
-
-## min_discard_size
-
- Type: integer
- Default: 1048576
-
-Minimum consecutive block size to TRIM it.
@@ -8,8 +8,8 @@

 Данные параметры используются только OSD, но, в отличие от дисковых параметров,
 не фиксируются в момент инициализации дисков OSD и могут быть изменены в любой
-момент с перезапуском OSD в /etc/vitastor/vitastor.conf или [vitastor-disk update-sb](../usage/disk.ru.md#update-sb),
-а некоторые и без перезапуска, с помощью изменения конфигурации в etcd.
+момент с помощью перезапуска OSD, а некоторые и без перезапуска, с помощью
+изменения конфигурации в etcd.

 - [osd_iothread_count](#osd_iothread_count)
 - [etcd_report_interval](#etcd_report_interval)
@@ -62,8 +62,6 @@
 - [recovery_tune_agg_interval](#recovery_tune_agg_interval)
 - [recovery_tune_sleep_min_us](#recovery_tune_sleep_min_us)
 - [recovery_tune_sleep_cutoff_us](#recovery_tune_sleep_cutoff_us)
- [discard_on_start](#discard_on_start)
- [min_discard_size](#min_discard_size)

 ## osd_iothread_count

@@ -662,16 +660,3 @@ EC (кодов коррекции ошибок) с более, чем 1 диск
 Максимальное возможное значение авто-подстроенного recovery_sleep_us.
 Большие значения считаются случайными выбросами и игнорируются в
 усреднении.
-
-## discard_on_start
-
- Тип: булево (да/нет)
-
-Освобождать (SSD TRIM) неиспользуемые блоки диска данных при каждом запуске OSD.
-
-## min_discard_size
-
- Тип: целое число
- Значение по умолчанию: 1048576
-
-Минимальный размер последовательного блока данных, чтобы освобождать его через TRIM.
@@ -43,7 +43,7 @@ Parameters:
 - [osd_tags](#osd_tags)
 - [primary_affinity_tags](#primary_affinity_tags)
 - [scrub_interval](#scrub_interval)
- [used_for_app](#used_for_app)
+- [used_for_fs](#used_for_fs)

 Examples:

@@ -377,37 +377,24 @@ of the OSDs containing a data chunk for a PG.
 Automatic scrubbing interval for this pool. Overrides
 [global scrub_interval setting](osd.en.md#scrub_interval).

-## used_for_app
+## used_for_fs

 - Type: string

-If non-empty, the pool is marked as used for a separate application, for example,
-VitastorFS or S3, which allocates Vitastor volume IDs by itself and does not use
-image/inode metadata in etcd.
+If non-empty, the pool is marked as used for VitastorFS with metadata stored
+in block image (regular Vitastor volume) named as the value of this pool parameter.

-When a pool is marked as used for such app, regular block volume creation in it
+When a pool is marked as used for VitastorFS, regular block volume creation in it
 is disabled (vitastor-cli refuses to create images without --force) to protect
-the user from block volume and FS/S3 volume ID collisions and data loss.
+the user from block volume and FS file ID collisions and data loss.

-Also such pools do not calculate per-inode space usage statistics in etcd because
-using it for an external application implies that it may contain a very large
-number of volumes and their statistics may take too much space in etcd.
-
-Setting used_for_app to `fs:<name>` tells Vitastor that the pool is used for VitastorFS
-with VitastorKV metadata base stored in a block image (regular Vitastor volume) named
-`<name>`.
-
-[vitastor-nfs](../usage/nfs.en.md), in its turn, refuses to use pools not marked
+[vitastor-nfs](../usage/nfs.ru.md), in its turn, refuses to use pools not marked
 for the corresponding FS when starting. This also implies that you can use one
 pool only for one VitastorFS.

-If you plan to use the pool for S3, set its used_for_app to `s3:<name>`. `<name>` may
-be basically anything you want (for example, `s3:standard`) - it's not validated
-by Vitastor S3 components in any way.
-
-All other values except prefixed with `fs:` or `s3:` may be used freely and don't
-mean anything special for Vitastor core components. For now, you can use them as
-you wish.
+The second thing that is disabled for VitastorFS pools is reporting per-inode space
+usage statistics in etcd because a FS pool may store a very large number of files
+and statistics for them all would take a lot of space in etcd.

 # Examples

@@ -42,7 +42,7 @@
 - [osd_tags](#osd_tags)
 - [primary_affinity_tags](#primary_affinity_tags)
 - [scrub_interval](#scrub_interval)
- [used_for_app](#used_for_app)
+- [used_for_fs](#used_for_fs)

 Примеры:

@@ -256,7 +256,7 @@ PG в Vitastor эферемерны, то есть вы можете менят

 ## raw_placement

- Тип: строка
+- Type: string

 Низкоуровневые правила генерации PG в форме DSL (доменно-специфичного языка).
 Используйте, только если действительно знаете, зачем вам это надо :)
@@ -383,39 +383,26 @@ OSD с "all".
 Интервал скраба, то есть, автоматической фоновой проверки данных для данного пула.
 Переопределяет [глобальную настройку scrub_interval](osd.ru.md#scrub_interval).

-## used_for_app
+## used_for_fs

- Тип: строка
+- Type: string

-Если непусто, пул помечается как используемый для отдельного приложения, например,
-для VitastorFS или S3, которое распределяет ID образов в пуле само и не использует
-метаданные образов/инодов в etcd.
+Если непусто, пул помечается как используемый для файловой системы VitastorFS с
+метаданными, хранимыми в блочном образе Vitastor с именем, равным значению
+этого параметра.

-Когда пул помечается используемым для такого приложения, создание обычных блочных
-образов в нём запрещается (vitastor-cli отказывается создавать образы без --force),
-чтобы защитить пользователя от коллизий ID блочных образов и томов ФС/S3, и,
-таким образом, от потери данных.
-
-Также для таких пулов отключается передача статистики в etcd по отдельным инодам,
-так как использование для внешнего приложения подразумевает, что пул может содержать
-очень много томов и их статистика может занять слишком много места в etcd.
-
-Установка used_for_app в значение `fs:<name>` сообщает о том, что пул используется
-для VitastorFS с базой метаданных VitastorKV, хранимой в блочном образе с именем
-`<name>`.
+Когда пул помечается как используемый для VitastorFS, создание обычных блочных
+образов в нём отключается (vitastor-cli отказывается создавать образы без --force),
+чтобы защитить пользователя от коллизий ID файлов и блочных образов и, таким
+образом, от потери данных.

 [vitastor-nfs](../usage/nfs.ru.md), в свою очередь, при запуске отказывается
-использовать для ФС пулы, не помеченные, как используемые для неё. Это также
-означает, что один пул может использоваться только для одной VitastorFS.
+использовать для ФС пулы, не выделенные для неё. Это также означает, что один
+пул может использоваться только для одной VitastorFS.

-Если же вы планируете использовать пул для данных S3, установите его used_for_app
-в значение `s3:<name>`, где `<name>` - любое название по вашему усмотрению
-(например, `s3:standard`) - конкретное содержимое `<name>` пока никак не проверяется
-компонентами Vitastor S3.
-
-Все остальные значения used_for_app, кроме начинающихся на `fs:` или `s3:`, не
-означают ничего особенного для основных компонентов Vitastor. Поэтому сейчас вы
-можете использовать их свободно любым желаемым способом.
+Также для ФС-пулов отключается передача статистики в etcd по отдельным инодам,
+так как ФС-пул может содержать очень много файлов и статистика по ним всем
+заняла бы очень много места в etcd.

 # Примеры

@@ -1,5 +1,5 @@
 # Runtime OSD Parameters

 These parameters only apply to OSDs, are not fixed at the moment of OSD drive
-initialization and can be changed - in /etc/vitastor/vitastor.conf or [vitastor-disk update-sb](../usage/disk.en.md#update-sb)
-with an OSD restart or, for some of them, even without restarting by updating configuration in etcd.
+initialization and can be changed - either with an OSD restart or, for some of
+them, even without restarting by updating configuration in etcd.
@@ -2,5 +2,5 @@

 Данные параметры используются только OSD, но, в отличие от дисковых параметров,
 не фиксируются в момент инициализации дисков OSD и могут быть изменены в любой
-момент с перезапуском OSD в /etc/vitastor/vitastor.conf или [vitastor-disk update-sb](../usage/disk.ru.md#update-sb),
-а некоторые и без перезапуска, с помощью изменения конфигурации в etcd.
+момент с помощью перезапуска OSD, а некоторые и без перезапуска, с помощью
+изменения конфигурации в etcd.
@@ -315,7 +315,7 @@
    decrease write performance for fast disks because page cache is an overhead
    itself.

-    Choose "directsync" to use [immediate_commit](layout-cluster.en.md#immediate_commit)
+    Choose "directsync" to use [immediate_commit](layout-cluster.ru.md#immediate_commit)
    (which requires disable_data_fsync) with drives having write-back cache
    which can't be turned off, for example, Intel Optane. Also note that *some*
    desktop SSDs (for example, HP EX950) may ignore O_SYNC thus making
@@ -765,12 +765,3 @@
    Максимальное возможное значение авто-подстроенного recovery_sleep_us.
    Большие значения считаются случайными выбросами и игнорируются в
    усреднении.
- name: discard_on_start
-  type: bool
-  info: Discard (SSD TRIM) unused data device blocks on every OSD startup.
-  info_ru: Освобождать (SSD TRIM) неиспользуемые блоки диска данных при каждом запуске OSD.
- name: min_discard_size
-  type: int
-  default: 1048576
-  info: Minimum consecutive block size to TRIM it.
-  info_ru: Минимальный размер последовательного блока данных, чтобы освобождать его через TRIM.
@@ -1,191 +0,0 @@
-[Documentation](../../README.md#documentation) → Installation → S3 for Vitastor
-
-----
-
-[Читать на русском](s3.ru.md)
-
-# S3 for Vitastor
-
-The moment has come - Vitastor S3 implementation based on Zenko CloudServer is released.
-
-## Highlights
-
- Zenko CloudServer is implemented in node.js.
- Object metadata is stored in MongoDB.
- Modified Zenko CloudServer version is used for Vitastor. It is slightly different from
-  the original, has an optimised build and unneeded dependencies are stripped off.
- Object data is stored in Vitastor block volumes, but the volume metadata is stored in
-  the same MongoDB, not in Vitastor etcd.
- Objects are written to volumes sequentially one after another. The space is allocated
-  with rounding to the sector size (4 KB), so each object takes at least 4 KB.
- An important property of such storage scheme is that small objects aren't chunked into
-  parts in Vitastor EC N+K pools and thus don't require reads from all N disks when
-  downloading.
- Deleted objects are marked as deleted, but the space is only actually freed during
-  asynchronously executed "defragmentation" process. Defragmentation runs automatically
-  in the background when a volume reaches configured amount of "garbage" (20% by default).
-  Defragmentation copies actual objects to new volume(s) and then removes the old volume.
-  Defragmentation can be configured in locationConfig.json.
-
-## Plans for future development
-
- User account storage in the DB instead of a static file. Original Zenko uses
-  a separate closed-source "Scality Vault" service for it, that's why we use
-  a static file for now.
- More detailed documentation.
- Support for other (and faster) key-value DBMS for object metadata storage.
- Other performance optimisations, for example, related to the used hash function -
-  MD5 used for Amazon compatibility purposes is relatively slow.
- Object Lifecycle support. There is a Lifecycle implementation for Zenko called
-  [Backbeat](https://github.com/scality/backbeat) but it's not adapted for Vitastor yet.
- Quota support. Original Zenko uses a separate "SCUBA" service for quotas, but
-  it's also proprietary and not available publicly.
-
-## Installation
-
-In a few words:
-
- Install MongoDB, create a user for S3 metadata DB.
- Create a Vitastor pool for S3 data.
- Download and setup the Docker container `vitalif/vitastor-zenko`.
-
-### Setup MongoDB
-
-You can setup MongoDB yourself, following the [MongoDB manual](https://www.mongodb.com/docs/manual/installation/).
-
-Or you can follow the instructions below - it describes a simple example of MongoDB setup
-in Docker (through docker-compose) with 3 replicas.
-
-1. On each host, create a file `docker-compose.yml` with the content listed below.
-   Replace `<YOUR_PASSWORD>` with your future mongodb administrator password, and optionally
-   replace `0.0.0.0` with `localhost,<server_IP>`. It's recommended to either use a private IP
-   or [setup TLS](https://www.mongodb.com/docs/manual/tutorial/configure-ssl/) afterwards.
-
-```
-version: '3.1'
-
-services:
-
-  mongo:
-    container_name: mongo
-    image: mongo:7-jammy
-    restart: always
-    environment:
-      MONGO_INITDB_ROOT_USERNAME: root
-      MONGO_INITDB_ROOT_PASSWORD: <YOUR_PASSWORD>
-    network_mode: host
-    volumes:
-      - ./keyfile:/opt/keyfile
-      - ./mongo-data/db:/data/db
-      - ./mongo-data/configdb:/data/configdb
-    entrypoint: /bin/bash -c
-    command: [ "chown mongodb /opt/keyfile && chmod 600 /opt/keyfile && . /usr/local/bin/docker-entrypoint.sh mongod --replSet rs0 --keyFile /opt/keyfile --bind_ip 0.0.0.0" ]
-```
-
-2. Generate a shared cluster key using `openssl rand -base64 756 > ./keyfile` and copy
-   that `keyfile` to all hosts.
-
-3. Start MongoDB on all hosts with `docker compose up -d mongo`.
-
-4. Enter Mongo Shell with `docker exec -it mongo mongosh -u root -p <YOUR_PASSWORD> localhost/admin`
-   and execute the following command (replace IP addresses `10.10.10.{1,2,3}` with your host IPs):
-
-`rs.initiate({ _id: 'rs0', members: [
-  { _id: 1, host: '10.10.10.1:27017' },
-  { _id: 2, host: '10.10.10.2:27017' },
-  { _id: 3, host: '10.10.10.3:27017' }
-] })`
-
-5. Stay in Mongo Shell and create a user for the future S3 database:
-
-`db.createUser({ user: 's3', pwd: '<YOUR_S3_PASSWORD>', roles: [
-  { role: 'readWrite', db: 's3' },
-  { role: 'dbAdmin', db: 's3' },
-  { role: 'readWrite', db: 'vitastor' },
-  { role: 'dbAdmin', db: 'vitastor' }
-] })`
-
-### Setup Vitastor
-
-Create a pool in Vitastor for S3 object data, for example:
-
-`vitastor-cli create-pool --ec 2+1 -n 512 s3-data --used_for_app s3:standard`
-
-The `--used_for_app` options works as fool-proofing and prevents you from
-accidentally creating a regular block volume in the S3 pool and overwriting some S3 data.
-Also it hides inode space statistics from Vitastor etcd.
-
-Retrieve the ID of your pool with `vitastor-cli ls-pools s3-data --detail`.
-
-### Setup Vitastor S3
-
-1. Add the following lines to `docker-compose.yml` (instead of `network_mode: host`,
-   you can use `ports: [ "8000:8000", "8002:8002" ]`):
-
-```
-  zenko:
-    container_name: zenko
-    image: vitalif/vitastor-zenko
-    restart: always
-    security_opt:
-      - seccomp:unconfined
-    ulimits:
-      memlock: -1
-    network_mode: host
-    volumes:
-      - /etc/vitastor:/etc/vitastor
-      - /etc/vitastor/s3:/conf
-```
-
-2. Download Docker image: `docker pull vitalif/vitastor-zenko`
-
-3. Extract configuration file examples from the Docker image:
-   ```
-   docker run --rm -it -v /etc/vitastor:/etc/vitastor -v /etc/vitastor/s3:/conf vitalif/vitastor-zenko configure.sh
-   ```
-
-4. Edit configuration files in `/etc/vitastor/s3/`:
-   - `config.json` - common settings.
-   - `authdata.json` - user accounts and access keys.
-   - `locationConfig.json` - S3 storage class list with placement settings.
-     Note: it actually contains storage classes (like STANDARD, COLD, etc)
-     instead of "locations" (zones like us-east-1) as in the original Zenko CloudServer.
-   - Put your MongoDB connection data into `config.json` and `locationConfig.json`.
-   - Put your Vitastor pool ID into `locationConfig.json`.
-   - For now, the complete list of Vitastor backend settings is only available [in the code](https://git.yourcmc.ru/vitalif/zenko-arsenal/src/branch/master/lib/storage/data/vitastor/VitastorBackend.ts#L94).
-
-### Start Zenko
-
-Start the S3 server with:
-
-```
-docker run --restart always --security-opt seccomp:unconfined --ulimit memlock=-1 --network=host \
-    -v /etc/vitastor:/etc/vitastor -v /etc/vitastor/s3:/conf --name zenko vitalif/vitastor-zenko
-```
-
-If you use default settings, Zenko CloudServer starts on port 8000.
-The default access key is `accessKey1` with a secret key of `verySecretKey1`.
-
-Now you can access your S3 with, for example, [s3cmd](https://s3tools.org/s3cmd):
-
-```
-s3cmd --access_key=accessKey1 --secret_key=verySecretKey1 --host=http://localhost:8000 mb s3://testbucket
-```
-
-Or even mount it with [GeeseFS](https://github.com/yandex-cloud/geesefs):
-
-```
-AWS_ACCESS_KEY_ID=accessKey1 \
-    AWS_SECRET_ACCESS_KEY=verySecretKey1 \
-    geesefs --endpoint http://localhost:8000 testbucket mountdir
-```
-
-## Author & License
-
- [Zenko CloudServer](https://s3-server.readthedocs.io/en/latest/) author is Scality,
-  licensed under [Apache License, version 2.0](https://www.apache.org/licenses/LICENSE-2.0)
- [Vitastor](https://git.yourcmc.ru/vitalif/vitastor/) and Zenko Vitastor backend author is
-  Vitaliy Filippov, licensed under [VNPL-1.1](https://git.yourcmc.ru/vitalif/vitastor/src/branch/master/VNPL-1.1.txt)
-  (a "network copyleft" license based on AGPL/SSPL, but worded in a better way)
- Vitastor S3 repository: https://git.yourcmc.ru/vitalif/zenko-cloudserver-vitastor
- Vitastor S3 backend code: https://git.yourcmc.ru/vitalif/zenko-arsenal/src/branch/master/lib/storage/data/vitastor/VitastorBackend.ts
@@ -1,171 +0,0 @@
-[Документация](../../README-ru.md#документация) → Установка → S3 на базе Vitastor
-
-----
-
-[Read in English](s3.en.md)
-
-# S3 на базе Vitastor
-
-Итак, свершилось - реализация Vitastor S3 на базе Zenko CloudServer достигла
-состояния готовности к публикации и использованию.
-
-## Ключевые особенности
-
- Zenko CloudServer реализован на node.js.
- Метаданные объектов хранятся в MongoDB.
- Поставляется модифицированная версия Zenko CloudServer, отвязанная от лишних зависимостей,
-  с оптимизированной сборкой и немного отличающаяся от оригинала.
- Данные объектов хранятся в блочных томах Vitastor, однако информация о самих томах
-  сохраняется не в etcd Vitastor, а тоже в БД на основе MongoDB.
- Объекты записываются в тома последовательно друг за другом. Место выделяется с округлением
-  до размера сектора (до 4 килобайт), поэтому каждый объект занимает как минимум 4 КБ.
- Благодаря такой схеме записи объектов мелкие объекты не нарезаются на части и поэтому не
-  требуют чтения с N дисков данных в EC N+K пулах Vitastor.
- При удалении объекты помечаются удалёнными, но место освобождается не сразу, а при
-  запускаемой асинхронно "дефрагментации". Дефрагментация запускается автоматически в фоне
-  при достижении заданного объёма "мусора" в томе (по умолчанию 20%), копирует актуальные
-  объекты в новые тома, после чего очищает старый том полностью. Дефрагментацию можно
-  настраивать в locationConfig.json.
-
-## Планы развития
-
- Хранение учётных записей в БД, а не в статическом файле (в оригинальном Zenko для
-  этого используется отдельный закрытый сервис "Scality Vault").
- Более подробная документация.
- Поддержка других (и более производительных) key-value СУБД для хранения метаданных.
- Другие оптимизации производительности, например, в области используемой хеш-функции
-  (хеш MD5, используемый в целях совместимости, относительно медленный).
- Поддержка Object Lifecycle. Реализация Lifecycle для Zenko существует и называется
-  [Backbeat](https://github.com/scality/backbeat), но она ещё не адаптирована для Vitastor.
- Квоты. В оригинальном Zenko для этого используется отдельный сервис "SCUBA", однако
-  он тоже является закрытым и недоступен для публичного использования.
-
-## Установка
-
-Кратко:
-
- Установите MongoDB, создайте пользователя для БД метаданных S3.
- Создайте в Vitastor пул для хранения данных объектов.
- Скачайте и настройте Docker-контейнер `vitalif/vitastor-zenko`.
-
-### Установка MongoDB
-
-Вы можете установить MongoDB сами, следуя [официальному руководству MongoDB](https://www.mongodb.com/docs/manual/installation/).
-
-Либо вы можете последовать инструкции, приведённой ниже - здесь описан простейший пример
-установки MongoDB в Docker (docker-compose) в конфигурации с 3 репликами.
-
-1. На всех 3 серверах создайте файл `docker-compose.yml`, заменив `<ВАШ_ПАРОЛЬ>`
-   на собственный будущий пароль администратора mongodb, а `0.0.0.0` по желанию
-   заменив на на `localhost,<IP_сервера>` - желательно либо использовать публично не доступный IP,
-   либо потом [настроить TLS](https://www.mongodb.com/docs/manual/tutorial/configure-ssl/).
-
-```
-version: '3.1'
-
-services:
-
-  mongo:
-    container_name: mongo
-    image: mongo:7-jammy
-    restart: always
-    environment:
-      MONGO_INITDB_ROOT_USERNAME: root
-      MONGO_INITDB_ROOT_PASSWORD: <ВАШ_ПАРОЛЬ>
-    network_mode: host
-    volumes:
-      - ./keyfile:/opt/keyfile
-      - ./mongo-data/db:/data/db
-      - ./mongo-data/configdb:/data/configdb
-    entrypoint: /bin/bash -c
-    command: [ "chown mongodb /opt/keyfile && chmod 600 /opt/keyfile && . /usr/local/bin/docker-entrypoint.sh mongod --replSet rs0 --keyFile /opt/keyfile --bind_ip 0.0.0.0" ]
-```
-
-2. В той же директории сгенерируйте общий ключ кластера командой `openssl rand -base64 756 > ./keyfile`
-   и скопируйте этот файл на все 3 сервера.
-
-3. На всех 3 серверах запустите MongoDB командой `docker compose up -d mongo`.
-
-4. Зайдите в Mongo Shell с помощью команды `docker exec -it mongo mongosh -u root -p <ВАШ_ПАРОЛЬ> localhost/admin`
-   и там выполните команду (заменив IP-адреса `10.10.10.{1,2,3}` на адреса своих серверов):
-
-`rs.initiate({ _id: 'rs0', members: [
-  { _id: 1, host: '10.10.10.1:27017' },
-  { _id: 2, host: '10.10.10.2:27017' },
-  { _id: 3, host: '10.10.10.3:27017' }
-] })`
-
-5. Находясь там же, в Mongo Shell, создайте пользователя с доступом к будущей базе данных S3:
-
-`db.createUser({ user: 's3', pwd: '<ВАШ_ПАРОЛЬ_S3>', roles: [
-  { role: 'readWrite', db: 's3' },
-  { role: 'dbAdmin', db: 's3' },
-  { role: 'readWrite', db: 'vitastor' },
-  { role: 'dbAdmin', db: 'vitastor' }
-] })`
-
-### Настройка Vitastor
-
-Создайте в Vitastor отдельный пул для данных объектов S3, например:
-
-`vitastor-cli create-pool --ec 2+1 -n 512 s3-data --used_for_app s3:standard`
-
-Опция `--used_for_app` работает как "защита от дурака" и не даёт вам случайно создать
-в этом пуле обычный блочный том и перезаписать им какие-то данные S3, а также скрывает
-статистику занятого места по томам S3 из etcd.
-
-Получите ID своего пула с помощью команды `vitastor-cli ls-pools --detail`.
-
-### Установка Vitastor S3
-
-1. Добавьте в `docker-compose.yml` строки (альтернативно вместо `network_mode: host`
-   можно использовать `ports: [ "8000:8000", "8002:8002" ]`):
-
-```
-  zenko:
-    container_name: zenko
-    image: vitalif/vitastor-zenko
-    restart: always
-    security_opt:
-      - seccomp:unconfined
-    ulimits:
-      memlock: -1
-    network_mode: host
-    volumes:
-      - /etc/vitastor:/etc/vitastor
-      - /etc/vitastor/s3:/conf
-```
-
-2. Извлеките из Docker-образа Vitastor примеры файлов конфигурации:
-   `docker run --rm -it -v /etc/vitastor:/etc/vitastor -v /etc/vitastor/s3:/conf vitalif/vitastor-zenko configure.sh`
-
-3. Отредактируйте файлы конфигурации в `/etc/vitastor/s3/`:
-   - `config.json` - общие настройки.
-   - `authdata.json` - учётные записи и ключи доступа.
-   - `locationConfig.json` - список классов хранения S3 с настройками расположения.
-     Внимание: в данной версии это именно список S3 storage class-ов (STANDARD, COLD и т.п.),
-     а не зон (подобных us-east-1), как в оригинальном Zenko CloudServer.
-   - В `config.json` и в `locationConfig.json` пропишите свои данные подключения к MongoDB.
-   - В `locationConfig.json` укажите ID пула Vitastor для хранения данных.
-   - Полный перечень настроек Vitastor-бэкенда пока можно посмотреть [в коде](https://git.yourcmc.ru/vitalif/zenko-arsenal/src/branch/master/lib/storage/data/vitastor/VitastorBackend.ts#L94).
-
-### Запуск
-
-Запустите S3-сервер: `docker-compose up -d zenko`
-
-Готово! Вы получили S3-сервер, работающий на порту 8000.
-
-Можете попробовать обратиться к нему с помощью, например, [s3cmd](https://s3tools.org/s3cmd):
-
-`s3cmd --host-bucket= --no-ssl --access_key=accessKey1 --secret_key=verySecretKey1 --host=http://localhost:8000 mb s3://testbucket`
-
-Или смонтировать его с помощью [GeeseFS](https://github.com/yandex-cloud/geesefs):
-
-`AWS_ACCESS_KEY_ID=accessKey1 AWS_SECRET_ACCESS_KEY=verySecretKey1 geesefs --endpoint http://localhost:8000 testbucket /mnt/geesefs`
-
-## Лицензия
-
- Автор [Zenko CloudServer](https://s3-server.readthedocs.io/en/latest/) - Scality, лицензия [Apache 2.0](https://www.apache.org/licenses/LICENSE-2.0)
- Vitastor-бэкенд для S3, как и сам Vitastor, лицензируется на условиях [VNPL 1.1](https://git.yourcmc.ru/vitalif/vitastor/src/branch/master/VNPL-1.1.txt)
- Репозиторий сборки: https://git.yourcmc.ru/vitalif/zenko-cloudserver-vitastor
- Бэкенд хранения данных: https://git.yourcmc.ru/vitalif/zenko-arsenal/src/branch/master/lib/storage/data/vitastor/VitastorBackend.ts
@@ -37,7 +37,6 @@
 - [Experimental internal etcd replacement - antietcd](../config/monitor.en.md#use_antietcd)
 - [Built-in Prometheus metric exporter](../config/monitor.en.md#enable_prometheus)
 - [NFS RDMA support](../usage/nfs.en.md#rdma) (probably also usable for GPUDirect)
- [S3](../installation/s3.en.md)

 ## Plugins and tools

@@ -64,6 +63,7 @@ The following features are planned for the future:
 - iSCSI and NVMeoF gateways
 - Multi-threaded client
 - Faster failover
+- S3
 - Tiered storage (SSD caching)
 - NVDIMM support
 - Compression (possibly)
@@ -39,7 +39,6 @@
 - [Экспериментальная встроенная замена etcd - antietcd](../config/monitor.ru.md#use_antietcd)
 - [Встроенный Prometheus-экспортер метрик](../config/monitor.ru.md#enable_prometheus)
 - [Поддержка NFS RDMA](../usage/nfs.ru.md#rdma) (вероятно, также подходящая для GPUDirect)
- [S3](../installation/s3.ru.md)

 ## Драйверы и инструменты

@@ -64,6 +63,7 @@
 - iSCSI и NVMeoF прокси
 - Многопоточный клиент
 - Более быстрое переключение при отказах
+- S3
 - Поддержка SSD-кэширования (tiered storage)
 - Поддержка NVDIMM
 - Возможно, сжатие
@@ -355,7 +355,7 @@ Set OSD reweight, tags or noout flag. See detail description in [OSD config docu

 ## pg-list

-`vitastor-cli pg-list|pg-ls|list-pg|ls-pg|ls-pgs|pgs [OPTIONS] [state1+state2] [^state3] [...]`
+`vitastor-cli pg-list|pg-ls|list-pg|ls-pg|ls-pgs [OPTIONS] [state1+state2] [^state3] [...]`

 List PGs with any of listed state filters (^ or ! in the beginning is negation). Options:

@@ -363,7 +363,6 @@ List PGs with any of listed state filters (^ or ! in the beginning is negation).
 --pool <pool name or number>  Only list PGs of the given pool.
 --min <min pg number>         Only list PGs with number >= min.
 --max <max pg number>         Only list PGs with number <= max.
--osd 1,2,...                 Only list PGs with some data on specified OSD(s).
 ```

 Examples:
@@ -399,8 +398,7 @@ Optional parameters:
 | `--raw_placement <rules>`      | Specify raw PG generation rules ([details](../config/pool.en.md#raw_placement)) |
 | `--primary_affinity_tags tags` | Prefer to put primary copies on OSDs with all specified tags               |
 | `--scrub_interval <time>`      | Enable regular scrubbing for this pool. Format: number + unit s/m/h/d/M/y  |
-| `--used_for_app fs:<name>`     | Mark pool as used for VitastorFS with metadata in image `<name>`           |
-| `--used_for_app s3:<name>`     | Mark pool as used for S3 location with name `<name>`                       |
+| `--used_for_fs <name>`         | Mark pool as used for VitastorFS with metadata in image <name>             |
 | `--pg_stripe_size <number>`    | Increase object grouping stripe                                            |
 | `--max_osd_combinations 10000` | Maximum number of random combinations for LP solver input                  |
 | `--wait`                       | Wait for the new pool to come online                                       |
@@ -375,10 +375,9 @@ OSD  PARENT            UP    SIZE  USED%    TAGS          WEIGHT  BLOCK  BITMAP
 в начале фильтра означает отрицание). Опции:

 ```
--pool <pool name or number>  Вывести только PG в заданном пуле.
--min <min pg number>         Вывести только PG с номерами >= min.
--max <max pg number>         Вывести только PG с номерами <= max.
--osd 1,2,...                 Вывести только PG с данными на заданных OSD.
+--pool <pool name or number>  Only list PGs of the given pool.
+--min <min pg number>         Only list PGs with number >= min.
+--max <max pg number>         Only list PGs with number <= max.
 ```

 Примеры:
@@ -14,7 +14,6 @@ It supports the following commands:
 - [upgrade-simple](#upgrade-simple)
 - [resize](#resize)
 - [raw-resize](#raw-resize)
- [trim](#trim)
 - [start/stop/restart/enable/disable](#start/stop/restart/enable/disable)
 - [purge](#purge)
 - [read-sb](#read-sb)
@@ -98,9 +97,6 @@ Options (both modes):
 --data_device_block 4k     Override data device block size
 --meta_device_block 4k     Override metadata device block size
 --journal_device_block 4k  Override journal device block size
--discard_on_start 0       TRIM unused data device blocks every OSD start (default off)
--min_discard_size 1M      Minimum TRIM block size
--json                     Enable JSON output
 ```

 [immediate_commit](../config/layout-cluster.en.md#immediate_commit) setting is
@@ -183,19 +179,6 @@ parameters from OSD command line (i.e. from systemd unit or superblock).
 SIZE may include k/m/g/t suffixes. If any of the new layout parameter
 options are not specified, old values will be used.

-## trim
-
-`vitastor-disk trim <osd_num>|<osd_device> [<osd_num>|<osd_device>...]`
-
-Try to discard unused blocks (SSD TRIM) on the data device of each of the OSD(s).
-
-May only be used on stopped OSDs. Options:
-
-```
--min_discard_size 1M      Minimum TRIM block size
--discard_granularity 0    Override device's discard granularity
-```
-
 ## start/stop/restart/enable/disable

 `vitastor-disk start|stop|restart|enable|disable [--now] <device> [device2 device3 ...]`
@@ -99,9 +99,6 @@ vitastor-disk - инструмент командной строки для уп
 --data_device_block 4k     Задать размер блока устройства данных
 --meta_device_block 4k     Задать размер блока метаданных
 --journal_device_block 4k  Задать размер блока журнала
--discard_on_start 0       Выполнять TRIM пустых блоков данных при запуске OSD (по умолчанию нет)
--min_discard_size 1M      Минимальный размер блока для TRIM
--json                     Включить JSON-вывод
 ```

 Настройка [immediate_commit](../config/layout-cluster.ru.md#immediate_commit)
@@ -185,20 +182,6 @@ throttle_target_mbs, throttle_target_parallelism, throttle_threshold_us.
 `РАЗМЕР` может быть указан с суффиксами k/m/g/t. Если любой из новых параметров
 расположения не указан, он принимается равным старому значению.

-## trim
-
-`vitastor-disk trim <osd_num>|<osd_device> [<osd_num>|<osd_device>...]`
-
-Попробовать пометить пустые блоки дисков данных всех указанных OSD неиспользуемыми
-(выполнить команду SSD TRIM).
-
-Можно использовать только с остановленными OSD. Опции:
-
-```
--min_discard_size 1M      Минимальный размер блока для TRIM
--discard_granularity 0    Кратность размера блока для TRIM
-```
-
 ## start/stop/restart/enable/disable

 `vitastor-disk start|stop|restart|enable|disable [--now] <device> [device2 device3 ...]`
@@ -58,7 +58,7 @@ To use VitastorFS:
 2. Create an image for FS metadata, preferably in a faster (SSD or replica-HDD) pool,
   but you can create it in the data pool too if you want (image size doesn't matter):
   `vitastor-cli create -s 10G -p fastpool testfs`
-3. Mark data pool as an FS pool: `vitastor-cli modify-pool --used-for-app fs:testfs data-pool`
+3. Mark data pool as an FS pool: `vitastor-cli modify-pool --used-for-fs testfs data-pool`
 4. Either mount the FS: `vitastor-nfs mount --fs testfs --pool data-pool /mnt/vita`
 5. Or start the NFS server: `vitastor-nfs start --fs testfs --pool data-pool`

@@ -60,7 +60,7 @@ JSON-формате :-). Для инспекции содержимого БД
   или по крайней мере на HDD, но без EC), но можно и в том же пуле, что данные
   (размер образа значения не имеет):
   `vitastor-cli create -s 10G -p fastpool testfs`
-3. Пометьте пул данных как ФС-пул: `vitastor-cli modify-pool --used-for-app fs:testfs data-pool`
+3. Пометьте пул данных как ФС-пул: `vitastor-cli modify-pool --used-for-fs testfs data-pool`
 4. Либо примонтируйте ФС: `vitastor-nfs mount --fs testfs --pool data-pool /mnt/vita`
 5. Либо запустите сетевой NFS-сервер: `vitastor-nfs start --fs testfs --pool data-pool`

@@ -1,6 +1,6 @@
 {
  "name": "vitastor-mon",
-  "version": "2.0.0",
+  "version": "1.11.0",
  "description": "Vitastor SDS monitor service",
  "main": "mon-main.js",
  "scripts": {
@@ -19,16 +19,11 @@
 class NodeVitastorRequest: public Nan::AsyncResource
 {
 public:
-    NodeVitastorRequest(NodeVitastor *cli, const v8::Local<v8::Function> & cb): Nan::AsyncResource("NodeVitastorRequest")
+    NodeVitastorRequest(NodeVitastor *cli, v8::Local<v8::Function> cb): Nan::AsyncResource("NodeVitastorRequest")
    {
        this->cli = cli;
        callback.Reset(cb);
    }
-    ~NodeVitastorRequest()
-    {
-        callback.Reset();
-        buffer_ref.Reset();
-    }

    iovec iov;
    std::vector<iovec> iov_list;
@@ -38,7 +33,6 @@ public:
    uint64_t offset = 0, len = 0, version = 0;
    bool with_parents = false;
    Nan::Persistent<v8::Function> callback;
-    Nan::Persistent<v8::Value> buffer_ref;
 };

 static uint64_t get_ui64(const v8::Local<v8::Value> & val)
@@ -135,8 +129,8 @@ NodeVitastorRequest* NodeVitastor::get_read_request(const Nan::FunctionCallbackI
        Nan::ThrowError("failed to allocate memory");
        return NULL;
    }
-
-    auto req = new NodeVitastorRequest(this, info[argpos+2].As<v8::Function>());
+    v8::Local<v8::Function> callback = info[argpos+2].As<v8::Function>();
+    auto req = new NodeVitastorRequest(this, callback);

    req->offset = offset;
    req->len = len;
@@ -183,11 +177,11 @@ NodeVitastorRequest* NodeVitastor::get_write_request(const Nan::FunctionCallback
        argpos++;
    }

-    auto req = new NodeVitastorRequest(this, info[argpos+2].As<v8::Function>());
+    v8::Local<v8::Function> callback = info[argpos+2].As<v8::Function>();
+    auto req = new NodeVitastorRequest(this, callback);

    req->offset = offset;
    req->version = version;
-    req->buffer_ref.Reset(bufarg);

    if (bufarg->IsArray())
    {
@@ -254,7 +248,8 @@ NodeVitastorRequest* NodeVitastor::get_delete_request(const Nan::FunctionCallbac
        argpos++;
    }

-    auto req = new NodeVitastorRequest(this, info[argpos+2].As<v8::Function>());
+    v8::Local<v8::Function> callback = info[argpos+2].As<v8::Function>();
+    auto req = new NodeVitastorRequest(this, callback);

    req->offset = offset;
    req->len = len;
@@ -294,7 +289,8 @@ NAN_METHOD(NodeVitastor::Sync)

    NodeVitastor* self = Nan::ObjectWrap::Unwrap<NodeVitastor>(info.This());

-    auto req = new NodeVitastorRequest(self, info[0].As<v8::Function>());
+    v8::Local<v8::Function> callback = info[0].As<v8::Function>();
+    auto req = new NodeVitastorRequest(self, callback);

    self->Ref();
    vitastor_c_sync(self->c, on_write_finish, req);
@@ -317,8 +313,9 @@ NAN_METHOD(NodeVitastor::ReadBitmap)
    uint64_t offset = get_ui64(info[2]);
    uint64_t len = get_ui64(info[3]);
    bool with_parents = Nan::To<bool>(info[4]).FromJust();
+    v8::Local<v8::Function> callback = info[5].As<v8::Function>();

-    auto req = new NodeVitastorRequest(self, info[5].As<v8::Function>());
+    auto req = new NodeVitastorRequest(self, callback);
    self->Ref();
    vitastor_c_read_bitmap(self->c, ((pool << (64-POOL_ID_BITS)) | inode), offset, len, with_parents, on_read_bitmap_finish, req);
 #if !defined VITASTOR_C_API_VERSION || VITASTOR_C_API_VERSION < 5
@@ -344,7 +341,8 @@ NAN_METHOD(NodeVitastor::OnReady)
    if (info.Length() < 1)
        Nan::ThrowError("Not enough arguments to on_ready(callback(err))");
    NodeVitastor* self = Nan::ObjectWrap::Unwrap<NodeVitastor>(info.This());
-    auto req = new NodeVitastorRequest(self, info[0].As<v8::Function>());
+    v8::Local<v8::Function> callback = info[0].As<v8::Function>();
+    auto req = new NodeVitastorRequest(self, callback);
    self->Ref();
    vitastor_c_on_ready(self->c, on_ready_finish, req);
 #if !defined VITASTOR_C_API_VERSION || VITASTOR_C_API_VERSION < 5
@@ -568,7 +566,8 @@ NAN_METHOD(NodeVitastorImage::Sync)

    NodeVitastorImage* img = Nan::ObjectWrap::Unwrap<NodeVitastorImage>(info.This());

-    auto req = new NodeVitastorRequest(img->cli, info[0].As<v8::Function>());
+    v8::Local<v8::Function> callback = info[0].As<v8::Function>();
+    auto req = new NodeVitastorRequest(img->cli, callback);
    req->img = img;
    req->op = NODE_VITASTOR_SYNC;

@@ -587,8 +586,9 @@ NAN_METHOD(NodeVitastorImage::ReadBitmap)
    uint64_t offset = get_ui64(info[0]);
    uint64_t len = get_ui64(info[1]);
    bool with_parents = Nan::To<bool>(info[2]).FromJust();
+    v8::Local<v8::Function> callback = info[3].As<v8::Function>();

-    auto req = new NodeVitastorRequest(img->cli, info[3].As<v8::Function>());
+    auto req = new NodeVitastorRequest(img->cli, callback);
    req->img = img;
    req->op = NODE_VITASTOR_READ_BITMAP;
    req->offset = offset;
@@ -607,7 +607,8 @@ NAN_METHOD(NodeVitastorImage::GetInfo)

    NodeVitastorImage* img = Nan::ObjectWrap::Unwrap<NodeVitastorImage>(info.This());

-    auto req = new NodeVitastorRequest(img->cli, info[0].As<v8::Function>());
+    v8::Local<v8::Function> callback = info[0].As<v8::Function>();
+    auto req = new NodeVitastorRequest(img->cli, callback);
    req->img = img;
    req->op = NODE_VITASTOR_GET_INFO;

@@ -802,7 +803,8 @@ NAN_METHOD(NodeVitastorKV::Open)
        cfg[std::string(*Nan::Utf8String(key))] = std::string(*Nan::Utf8String(Nan::Get(jsParams, key).ToLocalChecked()));
    }

-    auto req = new NodeVitastorRequest(kv->cli, info[3].As<v8::Function>());
+    v8::Local<v8::Function> callback = info[3].As<v8::Function>();
+    auto req = new NodeVitastorRequest(kv->cli, callback);

    kv->Ref();
    kv->dbw->open(inode_id, cfg, [kv, req](int res)
@@ -829,7 +831,8 @@ NAN_METHOD(NodeVitastorKV::Close)

    NodeVitastorKV* kv = Nan::ObjectWrap::Unwrap<NodeVitastorKV>(info.This());

-    auto req = new NodeVitastorRequest(kv->cli, info[0].As<v8::Function>());
+    v8::Local<v8::Function> callback = info[0].As<v8::Function>();
+    auto req = new NodeVitastorRequest(kv->cli, callback);

    kv->Ref();
    kv->dbw->close([kv, req]()
@@ -886,7 +889,8 @@ void NodeVitastorKV::get_impl(const Nan::FunctionCallbackInfo<v8::Value> & info,
    // FIXME: Handle Buffer too
    std::string key(*Nan::Utf8String(info[0].As<v8::String>()));

-    auto req = new NodeVitastorRequest(kv->cli, info[1].As<v8::Function>());
+    v8::Local<v8::Function> callback = info[1].As<v8::Function>();
+    auto req = new NodeVitastorRequest(kv->cli, callback);

    kv->Ref();
    kv->dbw->get(key, [kv, req](int res, const std::string & value)
@@ -951,12 +955,14 @@ NAN_METHOD(NodeVitastorKV::Set)
    std::string key(*Nan::Utf8String(info[0].As<v8::String>()));
    std::string value(*Nan::Utf8String(info[1].As<v8::String>()));

-    NodeVitastorRequest *req = new NodeVitastorRequest(kv->cli, info[2].As<v8::Function>()), *cas_req = NULL;
+    v8::Local<v8::Function> callback = info[2].As<v8::Function>();
+    NodeVitastorRequest *req = new NodeVitastorRequest(kv->cli, callback), *cas_req = NULL;

    std::function<bool(int, const std::string &)> cas_cb;
    if (info.Length() > 3 && info[3]->IsObject())
    {
-        cas_req = new NodeVitastorRequest(kv->cli, info[3].As<v8::Function>());
+        v8::Local<v8::Function> cas_callback = info[3].As<v8::Function>();
+        cas_req = new NodeVitastorRequest(kv->cli, cas_callback);
        cas_cb = make_cas_callback(cas_req);
    }

@@ -990,12 +996,14 @@ NAN_METHOD(NodeVitastorKV::Del)
    // FIXME: Handle Buffer too
    std::string key(*Nan::Utf8String(info[0].As<v8::String>()));

-    NodeVitastorRequest *req = new NodeVitastorRequest(kv->cli, info[1].As<v8::Function>()), *cas_req = NULL;
+    v8::Local<v8::Function> callback = info[1].As<v8::Function>();
+    NodeVitastorRequest *req = new NodeVitastorRequest(kv->cli, callback), *cas_req = NULL;

    std::function<bool(int, const std::string &)> cas_cb;
    if (info.Length() > 2 && info[2]->IsObject())
    {
-        cas_req = new NodeVitastorRequest(kv->cli, info[2].As<v8::Function>());
+        v8::Local<v8::Function> cas_callback = info[2].As<v8::Function>();
+        cas_req = new NodeVitastorRequest(kv->cli, cas_callback);
        cas_cb = make_cas_callback(cas_req);
    }

@@ -1094,11 +1102,12 @@ NAN_METHOD(NodeVitastorKVListing::Next)

    if (info.Length() > 0)
    {
+        v8::Local<v8::Function> callback = info[0].As<v8::Function>();
        if (list->iter)
        {
            delete list->iter;
        }
-        list->iter = new NodeVitastorRequest(list->kv->cli, info[0].As<v8::Function>());
+        list->iter = new NodeVitastorRequest(list->kv->cli, callback);
    }
    if (!list->handle)
    {
@@ -1,6 +1,6 @@
 {
  "name": "vitastor",
-  "version": "2.0.0",
+  "version": "1.11.0",
  "description": "Low-level native bindings to Vitastor client library",
  "main": "index.js",
  "keywords": [
@@ -16,7 +16,7 @@
    "build": "node-gyp rebuild"
  },
  "author": "Vitaliy Filippov",
-  "license": "VNPL-1.1",
+  "license": "VNPL-2.0",
  "dependencies": {
    "bindings": "1.5.0",
    "nan": "^2.19.0"
@@ -50,7 +50,7 @@ from cinder.volume import configuration
 from cinder.volume import driver
 from cinder.volume import volume_utils

-VITASTOR_VERSION = '2.0.0'
+VITASTOR_VERSION = '1.11.0'

 LOG = logging.getLogger(__name__)

@@ -1,11 +1,11 @@
 Name:           vitastor
-Version:        2.0.0
+Version:        1.11.0
 Release:        1%{?dist}
 Summary:        Vitastor, a fast software-defined clustered block storage

 License:        Vitastor Network Public License 1.1
 URL:            https://vitastor.io/
-Source0:        vitastor-2.0.0.el7.tar.gz
+Source0:        vitastor-1.11.0.el7.tar.gz

 BuildRequires:  liburing-devel >= 0.6
 BuildRequires:  gperftools-devel
@@ -1,11 +1,11 @@
 Name:           vitastor
-Version:        2.0.0
+Version:        1.11.0
 Release:        1%{?dist}
 Summary:        Vitastor, a fast software-defined clustered block storage

 License:        Vitastor Network Public License 1.1
 URL:            https://vitastor.io/
-Source0:        vitastor-2.0.0.el8.tar.gz
+Source0:        vitastor-1.11.0.el8.tar.gz

 BuildRequires:  liburing-devel >= 0.6
 BuildRequires:  gperftools-devel
@@ -1,11 +1,11 @@
 Name:           vitastor
-Version:        2.0.0
+Version:        1.11.0
 Release:        1%{?dist}
 Summary:        Vitastor, a fast software-defined clustered block storage

 License:        Vitastor Network Public License 1.1
 URL:            https://vitastor.io/
-Source0:        vitastor-2.0.0.el9.tar.gz
+Source0:        vitastor-1.11.0.el9.tar.gz

 BuildRequires:  liburing-devel >= 0.6
 BuildRequires:  gperftools-devel
@@ -19,7 +19,7 @@ if("${CMAKE_INSTALL_PREFIX}" MATCHES "^/usr/local/?$")
 	set(CMAKE_INSTALL_RPATH "${CMAKE_INSTALL_PREFIX}/${CMAKE_INSTALL_LIBDIR}")
 endif()

-add_definitions(-DVITASTOR_VERSION="2.0.0")
+add_definitions(-DVITASTOR_VERSION="1.11.0")
 add_definitions(-D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wno-sign-compare -Wno-comment -Wno-parentheses -Wno-pointer-arith -fdiagnostics-color=always -fno-omit-frame-pointer -I ${CMAKE_SOURCE_DIR}/src)
 add_link_options(-fno-omit-frame-pointer)
 if (${WITH_ASAN})
@@ -8,7 +8,6 @@
 #include "blockstore_impl.h"
 #include "blockstore_disk.h"
 #include "str_util.h"
-#include "allocator.h"

 static uint32_t is_power_of_two(uint64_t value)
 {
@@ -84,12 +83,6 @@ void blockstore_disk_t::parse_config(std::map<std::string, std::string> & config
        throw std::runtime_error("data_csum_type="+config["data_csum_type"]+" is unsupported, only \"crc32c\" and \"none\" are supported");
    }
    csum_block_size = parse_size(config["csum_block_size"]);
-    discard_on_start = config.find("discard_on_start") != config.end() &&
-        (config["discard_on_start"] == "true" || config["discard_on_start"] == "1" || config["discard_on_start"] == "yes");
-    min_discard_size = parse_size(config["min_discard_size"]);
-    if (!min_discard_size)
-        min_discard_size = 1024*1024;
-    discard_granularity = parse_size(config["discard_granularity"]);
    // Validate
    if (!data_block_size)
    {
@@ -179,6 +172,10 @@ void blockstore_disk_t::parse_config(std::map<std::string, std::string> & config
    {
        throw std::runtime_error("journal_offset must be a multiple of journal_block_size = "+std::to_string(journal_block_size));
    }
+    clean_entry_bitmap_size = data_block_size / bitmap_granularity / 8;
+    clean_dyn_size = clean_entry_bitmap_size*2 + (csum_block_size
+        ? data_block_size/csum_block_size*(data_csum_type & 0xFF) : 0);
+    clean_entry_size = sizeof(clean_disk_entry) + clean_dyn_size + 4 /*entry_csum*/;
 }

 void blockstore_disk_t::calc_lengths(bool skip_meta_check)
@@ -227,13 +224,9 @@ void blockstore_disk_t::calc_lengths(bool skip_meta_check)
    }
    // required metadata size
    block_count = data_len / data_block_size;
-    clean_entry_bitmap_size = data_block_size / bitmap_granularity / 8;
-    clean_dyn_size = clean_entry_bitmap_size*2 + (csum_block_size
-        ? data_block_size/csum_block_size*(data_csum_type & 0xFF) : 0);
-    clean_entry_size = sizeof(clean_disk_entry) + clean_dyn_size + 4 /*entry_csum*/;
    meta_len = (1 + (block_count - 1 + meta_block_size / clean_entry_size) / (meta_block_size / clean_entry_size)) * meta_block_size;
-    bool new_doesnt_fit = (!meta_format && !skip_meta_check && meta_area_size < meta_len && !data_csum_type);
-    if (meta_format == BLOCKSTORE_META_FORMAT_V1 || new_doesnt_fit)
+    if (meta_format == BLOCKSTORE_META_FORMAT_V1 ||
+        !meta_format && !skip_meta_check && meta_area_size < meta_len && !data_csum_type)
    {
        uint64_t clean_entry_v0_size = sizeof(clean_disk_entry) + 2*clean_entry_bitmap_size;
        uint64_t meta_v0_len = (1 + (block_count - 1 + meta_block_size / clean_entry_v0_size)
@@ -241,11 +234,7 @@ void blockstore_disk_t::calc_lengths(bool skip_meta_check)
        if (meta_format == BLOCKSTORE_META_FORMAT_V1 || meta_area_size >= meta_v0_len)
        {
            // Old metadata fits.
-            if (new_doesnt_fit)
-            {
-                printf("Warning: Using old metadata format without checksums because the new format"
-                    " doesn't fit into provided area (%lu bytes required, %lu bytes available)\n", meta_len, meta_area_size);
-            }
+            printf("Warning: Using old metadata format without checksums because the new format doesn't fit into provided area\n");
            clean_entry_size = clean_entry_v0_size;
            meta_len = meta_v0_len;
            meta_format = BLOCKSTORE_META_FORMAT_V1;
@@ -257,7 +246,7 @@ void blockstore_disk_t::calc_lengths(bool skip_meta_check)
        meta_format = BLOCKSTORE_META_FORMAT_V2;
    if (!skip_meta_check && meta_area_size < meta_len)
    {
-        throw std::runtime_error("Metadata area is too small, need at least "+std::to_string(meta_len)+" bytes, have only "+std::to_string(meta_area_size)+" bytes");
+        throw std::runtime_error("Metadata area is too small, need at least "+std::to_string(meta_len)+" bytes");
    }
    // requested journal size
    if (!skip_meta_check && cfg_journal_size > journal_len)
@@ -426,44 +415,3 @@ void blockstore_disk_t::close_all()
        close(journal_fd);
    data_fd = meta_fd = journal_fd = -1;
 }
-
-// Sadly DISCARD only works through ioctl(), but it seems to always block the device queue,
-// so it's not a big deal that we can only run it synchronously.
-int blockstore_disk_t::trim_data(allocator_t *alloc)
-{
-    int r = 0;
-    uint64_t j = 0, i = 0;
-    uint64_t discarded = 0;
-    for (; i <= block_count; i++)
-    {
-        if (i >= block_count || alloc->get(i))
-        {
-            if (i > j && (i-j)*data_block_size >= min_discard_size)
-            {
-                uint64_t range[2] = { data_offset + j*data_block_size, (i-j)*data_block_size };
-                if (discard_granularity)
-                {
-                    range[1] += range[0];
-                    if (range[1] % discard_granularity)
-                        range[1] = range[1] - (range[1] % discard_granularity);
-                    if (range[0] % discard_granularity)
-                        range[0] = range[0] + discard_granularity - (range[0] % discard_granularity);
-                    if (range[0] >= range[1])
-                        continue;
-                    range[1] -= range[0];
-                }
-                r = ioctl(data_fd, BLKDISCARD, &range);
-                if (r != 0)
-                {
-                    fprintf(stderr, "Failed to execute BLKDISCARD %ju+%ju on %s: %s (code %d)\n",
-                        range[0], range[1], data_device.c_str(), strerror(-r), r);
-                    return -errno;
-                }
-                discarded += range[1];
-            }
-            j = i+1;
-        }
-    }
-    fprintf(stderr, "%s (%ju bytes) of unused data discarded on %s\n", format_size(discarded).c_str(), discarded, data_device.c_str());
-    return 0;
-}
@@ -12,8 +12,6 @@
 // Lower byte of checksum type is its length
 #define BLOCKSTORE_CSUM_CRC32C 0x104

-class allocator_t;
-
 struct blockstore_disk_t
 {
    std::string data_device, meta_device, journal_device;
@@ -36,18 +34,14 @@ struct blockstore_disk_t
    // I/O modes for data, metadata and journal: direct or "" = O_DIRECT, cached = O_SYNC, directsync = O_DIRECT|O_SYNC
    // O_SYNC without O_DIRECT = use Linux page cache for reads and writes
    std::string data_io, meta_io, journal_io;
-    // Data discard granularity and minimum size (for the sake of performance)
-    bool discard_on_start = false;
-    uint64_t min_discard_size = 1024*1024;
-    uint64_t discard_granularity = 0;

    int meta_fd = -1, data_fd = -1, journal_fd = -1;
    uint64_t meta_offset, meta_device_sect, meta_device_size, meta_len, meta_format = 0;
    uint64_t data_offset, data_device_sect, data_device_size, data_len;
    uint64_t journal_offset, journal_device_sect, journal_device_size, journal_len;

-    uint32_t block_order = 0;
-    uint64_t block_count = 0;
+    uint32_t block_order;
+    uint64_t block_count;
    uint32_t clean_entry_bitmap_size = 0, clean_entry_size = 0, clean_dyn_size = 0;

    void parse_config(std::map<std::string, std::string> & config);
@@ -56,7 +50,6 @@ struct blockstore_disk_t
    void open_journal();
    void calc_lengths(bool skip_meta_check = false);
    void close_all();
-    int trim_data(allocator_t *alloc);

    inline uint64_t dirty_dyn_size(uint64_t offset, uint64_t len)
    {
@@ -12,15 +12,15 @@ blockstore_impl_t::blockstore_impl_t(blockstore_config_t & config, ring_loop_t *
    ringloop->register_consumer(&ring_consumer);
    initialized = 0;
    parse_config(config, true);
+    zero_object = (uint8_t*)memalign_or_die(MEM_ALIGNMENT, dsk.data_block_size);
+    alloc_dyn_data = dsk.clean_dyn_size > sizeof(void*) || dsk.csum_block_size > 0;
    try
    {
        dsk.open_data();
        dsk.open_meta();
        dsk.open_journal();
        calc_lengths();
-        alloc_dyn_data = dsk.clean_dyn_size > sizeof(void*) || dsk.csum_block_size > 0;
-        zero_object = (uint8_t*)memalign_or_die(MEM_ALIGNMENT, dsk.data_block_size);
-        data_alloc = new allocator_t(dsk.block_count);
+        data_alloc = new allocator(dsk.block_count);
    }
    catch (std::exception & e)
    {
@@ -34,8 +34,7 @@ blockstore_impl_t::~blockstore_impl_t()
 {
    delete data_alloc;
    delete flusher;
-    if (zero_object)
-        free(zero_object);
+    free(zero_object);
    ringloop->unregister_consumer(&ring_consumer);
    dsk.close_all();
    if (metadata_buffer)
@@ -84,20 +83,14 @@ void blockstore_impl_t::loop()
            {
                delete journal_init_reader;
                journal_init_reader = NULL;
-                initialized = 3;
+                if (journal.flush_journal)
+                    initialized = 3;
+                else
+                    initialized = 10;
                ringloop->wakeup();
            }
        }
        if (initialized == 3)
-        {
-            if (!readonly && dsk.discard_on_start)
-                dsk.trim_data(data_alloc);
-            if (journal.flush_journal)
-                initialized = 4;
-            else
-                initialized = 10;
-        }
-        if (initialized == 4)
        {
            if (readonly)
            {
@@ -279,9 +279,9 @@ class blockstore_impl_t
    std::vector<obj_ver_id> unsynced_big_writes, unsynced_small_writes;
    int unsynced_big_write_count = 0, unstable_unsynced = 0;
    int unsynced_queued_ops = 0;
-    allocator_t *data_alloc = NULL;
+    allocator *data_alloc = NULL;
    uint64_t used_blocks = 0;
-    uint8_t *zero_object = NULL;
+    uint8_t *zero_object;

    void *metadata_buffer = NULL;

@@ -138,11 +138,7 @@ resume_1:
                exit(1);
            }
            hdr->header_csum = csum;
-            if (bs->dsk.meta_format != BLOCKSTORE_META_FORMAT_V2)
-            {
-                bs->dsk.meta_format = BLOCKSTORE_META_FORMAT_V2;
-                bs->dsk.calc_lengths();
-            }
+            bs->dsk.meta_format = BLOCKSTORE_META_FORMAT_V2;
        }
        else if (hdr->version == BLOCKSTORE_META_FORMAT_V1)
        {
@@ -150,15 +146,11 @@ resume_1:
            hdr->csum_block_size = 0;
            hdr->header_csum = 0;
            // Enable compatibility mode - entries without checksums
-            if (bs->dsk.meta_format != BLOCKSTORE_META_FORMAT_V1 ||
-                bs->dsk.data_csum_type != 0 || bs->dsk.csum_block_size != 0)
-            {
-                bs->dsk.data_csum_type = 0;
-                bs->dsk.csum_block_size = 0;
-                bs->dsk.meta_format = BLOCKSTORE_META_FORMAT_V1;
-                bs->dsk.calc_lengths();
-                printf("Warning: Starting with metadata in the old format without checksums, as stored on disk\n");
-            }
+            bs->dsk.clean_entry_size = sizeof(clean_disk_entry) + bs->dsk.clean_entry_bitmap_size*2;
+            bs->dsk.meta_len = (1 + (bs->dsk.block_count - 1 + bs->dsk.meta_block_size / bs->dsk.clean_entry_size)
+                / (bs->dsk.meta_block_size / bs->dsk.clean_entry_size)) * bs->dsk.meta_block_size;
+            bs->dsk.meta_format = BLOCKSTORE_META_FORMAT_V1;
+            printf("Warning: Starting with metadata in the old format without checksums, as stored on disk\n");
        }
        else if (hdr->version > BLOCKSTORE_META_FORMAT_V2)
        {
@@ -346,7 +338,7 @@ bool blockstore_init_meta::handle_meta_block(uint8_t *buf, uint64_t entries_per_
                uint32_t *entry_csum = (uint32_t*)((uint8_t*)entry + bs->dsk.clean_entry_size - 4);
                if (*entry_csum != crc32c(0, entry, bs->dsk.clean_entry_size - 4))
                {
-                    printf("Metadata entry %ju is corrupt (checksum mismatch: %08x vs %08x), skipping\n", done_cnt+i, *entry_csum, crc32c(0, entry, bs->dsk.clean_entry_size - 4));
+                    printf("Metadata entry %ju is corrupt (checksum mismatch), skipping\n", done_cnt+i);
                    // zero out the invalid entry, otherwise we'll hit "tried to overwrite non-zero metadata entry" later
                    if (bs->inmemory_meta)
                    {
@@ -52,7 +52,6 @@ public:
    bool read_from_cache(cluster_op_t *op, uint32_t bitmap_granularity);
    void flush_buffers(cluster_client_t *cli, dirty_buf_it_t from_it, dirty_buf_it_t to_it);
    void mark_flush_written(uint64_t inode, uint64_t offset, uint64_t len, uint64_t flush_id);
-    void delete_flush(uint64_t inode, uint64_t offset, uint64_t len, uint64_t flush_id);
    void fsync_start();
    void fsync_error();
    void fsync_ok();
@@ -9,7 +9,7 @@ writeback_cache_t::~writeback_cache_t()
 {
    for (auto & bp: dirty_buffers)
    {
-        if (bp.second.buf && !--(*bp.second.refcnt))
+        if (!--(*bp.second.refcnt))
        {
            free(bp.second.refcnt); // refcnt is allocated with the buffer
        }
@@ -115,10 +115,7 @@ void writeback_cache_t::copy_write(cluster_op_t *op, int state, uint64_t new_flu
                    .flush_id = dirty_it->second.flush_id,
                    .refcnt = dirty_it->second.refcnt,
                });
-                if (dirty_it->second.buf)
-                {
-                    (*dirty_it->second.refcnt)++;
-                }
+                (*dirty_it->second.refcnt)++;
                if (dirty_it->second.state == CACHE_DIRTY)
                {
                    if (dirty_it->second.buf)
@@ -196,7 +193,7 @@ void writeback_cache_t::copy_write(cluster_op_t *op, int state, uint64_t new_flu
                    writeback_queue_size++;
                }
            }
-            if (dirty_it->second.buf && !--(*dirty_it->second.refcnt))
+            if (!--(*dirty_it->second.refcnt))
            {
                free(dirty_it->second.refcnt);
            }
@@ -207,10 +204,7 @@ void writeback_cache_t::copy_write(cluster_op_t *op, int state, uint64_t new_flu
    bool is_del = op->opcode == OSD_OP_DELETE;
    uint64_t *refcnt = is_del ? NULL : (uint64_t*)malloc_or_die(sizeof(uint64_t) + op->len);
    uint8_t *buf = is_del ? NULL : ((uint8_t*)refcnt + sizeof(uint64_t));
-    if (!is_del)
-    {
-        *refcnt = 1;
-    }
+    *refcnt = 1;
    dirty_it = dirty_buffers.emplace_hint(dirty_it, (object_id){
        .inode = op->inode,
        .stripe = op->offset,
@@ -332,14 +326,7 @@ void writeback_cache_t::flush_buffers(cluster_client_t *cli, dirty_buf_it_t from
            }
            flushed_buffers.erase(fl_it++);
        }
-        if (op->flags & OP_IMMEDIATE_COMMIT)
-        {
-            delete_flush(op->inode, op->offset, op->len, flush_id);
-        }
-        else
-        {
-            mark_flush_written(op->inode, op->offset, op->len, flush_id);
-        }
+        mark_flush_written(op->inode, op->offset, op->len, flush_id);
        delete op;
        writebacks_active--;
        // We can't call execute_internal because it affects an invalid copy of the list here
@@ -357,25 +344,6 @@ void writeback_cache_t::flush_buffers(cluster_client_t *cli, dirty_buf_it_t from
    }
 }

-void writeback_cache_t::delete_flush(uint64_t inode, uint64_t offset, uint64_t len, uint64_t flush_id)
-{
-    for (auto dirty_it = find_dirty(inode, offset);
-        dirty_it != dirty_buffers.end() && dirty_it->first.inode == inode &&
-        dirty_it->first.stripe < offset+len; )
-    {
-        if (dirty_it->second.flush_id == flush_id && dirty_it->second.state == CACHE_REPEATING)
-        {
-            if (dirty_it->second.buf && !--(*dirty_it->second.refcnt))
-            {
-                free(dirty_it->second.refcnt);
-            }
-            dirty_buffers.erase(dirty_it++);
-        }
-        else
-            dirty_it++;
-    }
-}
-
 void writeback_cache_t::mark_flush_written(uint64_t inode, uint64_t offset, uint64_t len, uint64_t flush_id)
 {
    for (auto dirty_it = find_dirty(inode, offset);
@@ -592,10 +560,8 @@ void writeback_cache_t::fsync_ok()
    {
        if (uw_it->second.state == CACHE_FLUSHING)
        {
-            if (uw_it->second.buf && !--(*uw_it->second.refcnt))
-            {
+            if (!--(*uw_it->second.refcnt))
                free(uw_it->second.refcnt);
-            }
            dirty_buffers.erase(uw_it++);
        }
        else
@@ -889,11 +889,7 @@ void etcd_state_client_t::parse_state(const etcd_kv_t & kv)
            if (!pc.scrub_interval)
                pc.scrub_interval = 0;
            // Mark pool as VitastorFS pool (disable per-inode stats and block volume creation)
-            pc.used_for_app = pool_item.second["used_for_fs"].as_string();
-            if (pc.used_for_app != "")
-                pc.used_for_app = "fs:"+pc.used_for_app;
-            else
-                pc.used_for_app = pool_item.second["used_for_app"].as_string();
+            pc.used_for_fs = pool_item.second["used_for_fs"].as_string();
            // Immediate Commit Mode
            pc.immediate_commit = pool_item.second["immediate_commit"].is_string()
                ? parse_immediate_commit(pool_item.second["immediate_commit"].string_value(), IMMEDIATE_ALL)
@@ -61,7 +61,7 @@ struct pool_config_t
    uint64_t pg_stripe_size;
    std::map<pg_num_t, pg_config_t> pg_config;
    uint64_t scrub_interval;
-    std::string used_for_app;
+    std::string used_for_fs;
    int backfillfull;
 };

@@ -1194,7 +1194,7 @@ protected:
        }
        else
        {
-            if (cur_op->opcode == OSD_OP_WRITE && !inode && watch->cfg.readonly)
+            if (cur_op->opcode == OSD_OP_WRITE && watch->cfg.readonly)
            {
                cur_op->retval = -EROFS;
                std::function<void(cluster_op_t*)>(cur_op->callback)(cur_op);
@@ -6,7 +6,7 @@ includedir=${prefix}/@CMAKE_INSTALL_INCLUDEDIR@

 Name: Vitastor
 Description: Vitastor client library
-Version: 2.0.0
+Version: 1.11.0
 Libs: -L${libdir} -lvitastor_client
 Cflags: -I${includedir}

@@ -127,7 +127,7 @@ vitastor_c *vitastor_c_create_qemu_uring(QEMUSetFDHandler *aio_set_fd_handler, v
    auto self = vitastor_c_create_qemu_common(aio_set_fd_handler, aio_context);
    self->ringloop = ringloop;
    self->cli = new cluster_client_t(self->ringloop, self->tfd, cfg_json);
-    ringloop->loop();
+    ringloop->loop_continue();
    return self;
 }

@@ -151,7 +151,7 @@ vitastor_c *vitastor_c_create_uring(const char *config_path, const char *etcd_ho
    self->ringloop = ringloop;
    self->epmgr = new epoll_manager_t(self->ringloop);
    self->cli = new cluster_client_t(self->ringloop, self->epmgr->tfd, cfg_json);
-    ringloop->loop();
+    ringloop->loop_continue();
    return self;
 }

@@ -185,7 +185,7 @@ vitastor_c *vitastor_c_create_uring_json(const char **options, int options_len)
    self->ringloop = ringloop;
    self->epmgr = new epoll_manager_t(self->ringloop);
    self->cli = new cluster_client_t(self->ringloop, self->epmgr->tfd, cfg_json);
-    ringloop->loop();
+    ringloop->loop_continue();
    return self;
 }

@@ -233,7 +233,7 @@ void vitastor_c_on_ready(vitastor_c *client, VitastorIOHandler cb, void *opaque)
    });
    if (client->ringloop)
    {
-        client->ringloop->loop();
+        client->ringloop->loop_continue();
    }
 }

@@ -293,7 +293,7 @@ void vitastor_c_read(vitastor_c *client, uint64_t inode, uint64_t offset, uint64
    client->cli->execute(op);
    if (client->ringloop)
    {
-        client->ringloop->loop();
+        client->ringloop->loop_continue();
    }
 }

@@ -318,7 +318,7 @@ void vitastor_c_write(vitastor_c *client, uint64_t inode, uint64_t offset, uint6
    client->cli->execute(op);
    if (client->ringloop)
    {
-        client->ringloop->loop();
+        client->ringloop->loop_continue();
    }
 }

@@ -339,7 +339,7 @@ void vitastor_c_delete(vitastor_c *client, uint64_t inode, uint64_t offset, uint
    client->cli->execute(op);
    if (client->ringloop)
    {
-        client->ringloop->loop();
+        client->ringloop->loop_continue();
    }
 }

@@ -365,7 +365,7 @@ void vitastor_c_read_bitmap(vitastor_c *client, uint64_t inode, uint64_t offset,
    client->cli->execute(op);
    if (client->ringloop)
    {
-        client->ringloop->loop();
+        client->ringloop->loop_continue();
    }
 }

@@ -381,7 +381,7 @@ void vitastor_c_sync(vitastor_c *client, VitastorIOHandler cb, void *opaque)
    client->cli->execute(op);
    if (client->ringloop)
    {
-        client->ringloop->loop();
+        client->ringloop->loop_continue();
    }
 }

@@ -394,7 +394,7 @@ void vitastor_c_watch_inode(vitastor_c *client, char *image, VitastorIOHandler c
    });
    if (client->ringloop)
    {
-        client->ringloop->loop();
+        client->ringloop->loop_continue();
    }
 }

@@ -160,12 +160,11 @@ static const char* help_text =
    "vitastor-cli modify-osd [--tags tag1,tag2,...] [--reweight <number>] [--noout true/false] <osd_number>\n"
    "  Set OSD reweight, tags or noout flag.\n"
    "\n"
-    "vitastor-cli pg-list|pg-ls|list-pg|ls-pg|ls-pgs|pgs [OPTIONS] [state1+state2] [^state3] [...]\n"
+    "vitastor-cli pg-list|pg-ls|list-pg|ls-pg|ls-pgs [OPTIONS] [state1+state2] [^state3] [...]\n"
    "  List PGs with any of listed state filters (^ or ! in the beginning is negation). Options:\n"
    "    --pool <pool name or number>  Only list PGs of the given pool.\n"
    "    --min <min pg number>         Only list PGs with number >= min.\n"
    "    --max <max pg number>         Only list PGs with number <= max.\n"
-    "    --osd 1,2,...                 Only list PGs with some data on specified OSD(s).\n"
    "  Examples:\n"
    "    vitastor-cli pg-list active+degraded\n"
    "    vitastor-cli pg-list ^active\n"
@@ -187,8 +186,7 @@ static const char* help_text =
    "    --raw_placement <rules>       Specify raw PG generation rules (see documentation for details)\n"
    "    --primary_affinity_tags tags  Prefer to put primary copies on OSDs with all specified tags\n"
    "    --scrub_interval <time>       Enable regular scrubbing for this pool. Format: number + unit s/m/h/d/M/y\n"
-    "    --used_for_app fs:<name>      Mark pool as used for VitastorFS with metadata in image <name>\n"
-    "    --used_for_app s3:<name>      Mark pool as used for S3 location with name <name>\n"
+    "    --used_for_fs <name>          Mark pool as used for VitastorFS with metadata in image <name>\n"
    "    --pg_stripe_size <number>     Increase object grouping stripe\n"
    "    --max_osd_combinations 10000  Maximum number of random combinations for LP solver input\n"
    "    --wait                        Wait for the new pool to come online\n"
@@ -200,7 +198,7 @@ static const char* help_text =
    "vitastor-cli modify-pool|pool-modify <id|name> [--name <new_name>] [PARAMETERS...]\n"
    "  Modify an existing pool. Modifiable parameters:\n"
    "    [-s|--pg_size <number>] [--pg_minsize <number>] [-n|--pg_count <count>]\n"
-    "    [--failure_domain <level>] [--root_node <node>] [--osd_tags <tags>] [--used_for_app <type>:<name>]\n"
+    "    [--failure_domain <level>] [--root_node <node>] [--osd_tags <tags>] [--used_for_fs <name>]\n"
    "    [--max_osd_combinations <number>] [--primary_affinity_tags <tags>] [--scrub_interval <time>]\n"
    "    [--level_placement <rules>] [--raw_placement <rules>]\n"
    "  Non-modifiable parameters (changing them WILL lead to data loss):\n"
@@ -484,7 +482,7 @@ static int run(cli_tool_t *p, json11::Json::object cfg)
            cfg["osd_num"] = cmd[1];
        action_cb = p->start_modify_osd(cfg);
    }
-    else if (cmd[0] == "pg-list" || cmd[0] == "pg-ls" || cmd[0] == "list-pg" || cmd[0] == "ls-pg" || cmd[0] == "ls-pgs" || cmd[0] == "pgs")
+    else if (cmd[0] == "pg-list" || cmd[0] == "pg-ls" || cmd[0] == "list-pg" || cmd[0] == "ls-pg" || cmd[0] == "ls-pgs")
    {
        // Modify OSD configuration
        if (cmd.size() > 1)
@@ -92,12 +92,12 @@ struct image_creator_t
        {
            new_pool_id = pools.begin()->first;
        }
-        if (new_pool_id && !pools.at(new_pool_id).used_for_app.empty() && !force)
+        if (new_pool_id && !pools.at(new_pool_id).used_for_fs.empty() && !force)
        {
            result = (cli_result_t){
                .err = EINVAL,
                .text = "Pool "+pools.at(new_pool_id).name+
-                    " is used for application "+pools.at(new_pool_id).used_for_app+
+                    " is used for VitastorFS "+pools.at(new_pool_id).used_for_fs+
                    ". Use --force if you really know what you are doing",
            };
            state = 100;
@@ -11,7 +11,6 @@ struct pg_lister_t
    cli_tool_t *parent;

    uint64_t pool_id = 0;
-    std::set<osd_num_t> osd_nums;
    std::string pool_name;
    std::vector<std::string> pg_state;
    uint64_t min_pg_num = 0;
@@ -138,22 +137,6 @@ resume_1:
                    {
                        continue;
                    }
-                    if (osd_nums.size())
-                    {
-                        bool found = false;
-                        for (int i = 0; !found && i < pgp.second.target_set.size(); i++)
-                            if (osd_nums.find(pgp.second.target_set[i]) != osd_nums.end())
-                                found = true;
-                        for (int i = 0; !found && i < pgp.second.target_history.size(); i++)
-                            for (int j = 0; !found && j < pgp.second.target_history[i].size(); j++)
-                                if (osd_nums.find(pgp.second.target_history[i][j]) != osd_nums.end())
-                                    found = true;
-                        for (int i = 0; !found && i < pgp.second.all_peers.size(); i++)
-                            if (osd_nums.find(pgp.second.all_peers[i]) != osd_nums.end())
-                                found = true;
-                        if (!found)
-                            continue;
-                    }
                    if (masks.size())
                    {
                        bool found = false;
@@ -291,14 +274,6 @@ std::function<bool(cli_result_t &)> cli_tool_t::start_pg_list(json11::Json cfg)
        pg_lister->pg_state.push_back(cfg["pg_state"].string_value());
    pg_lister->min_pg_num = cfg["min"].uint64_value();
    pg_lister->max_pg_num = cfg["max"].uint64_value();
-    if (cfg["osd"].is_array())
-        for (auto & osd_num_json: cfg["osd"].array_items())
-            pg_lister->osd_nums.insert(osd_num_json.uint64_value());
-    else if (cfg["osd"].is_string())
-        for (auto & osd_num_str: explode(",", cfg["osd"].string_value(), true))
-            pg_lister->osd_nums.insert(stoull_full(osd_num_str));
-    else if (cfg["osd"].uint64_value())
-        pg_lister->osd_nums.insert(cfg["osd"].uint64_value());
    return [pg_lister](cli_result_t & result)
    {
        pg_lister->loop();
@@ -90,8 +90,8 @@ std::string validate_pool_config(json11::Json::object & new_cfg, json11::Json ol
            value = sz;
        }
        else if (key == "name" || key == "scheme" || key == "immediate_commit" ||
-            key == "failure_domain" || key == "root_node" || key == "scrub_interval" || key == "used_for_app" ||
-            key == "used_for_fs" || key == "raw_placement")
+            key == "failure_domain" || key == "root_node" || key == "scrub_interval" || key == "used_for_fs" ||
+            key == "raw_placement")
        {
            if (!value.is_string())
            {
@@ -156,13 +156,8 @@ std::string validate_pool_config(json11::Json::object & new_cfg, json11::Json ol
    {
        new_cfg.erase("parity_chunks");
    }
-    if (new_cfg.find("used_for_app") != new_cfg.end() && new_cfg["used_for_app"].string_value() == "")
+    if (new_cfg.find("used_for_fs") != new_cfg.end() && new_cfg["used_for_fs"].string_value() == "")
    {
-        new_cfg.erase("used_for_app");
-    }
-    if (new_cfg.find("used_for_app") == new_cfg.end() && new_cfg.find("used_for_fs") != new_cfg.end())
-    {
-        new_cfg["used_for_app"] = "fs:"+new_cfg["used_for_fs"].string_value();
        new_cfg.erase("used_for_fs");
    }

@@ -199,9 +199,7 @@ resume_1:
            auto & st = pool_stats[pool_id];
            for (auto & kv: pp.second.object_items())
            {
-                if (kv.first == "used_for_fs" && st.find("used_for_app") == st.end())
-                    st["used_for_app"] = "fs:"+kv.second.string_value();
-                else if (st.find(kv.first) == st.end())
+                if (st.find(kv.first) == st.end())
                    st[kv.first] = kv.second;
            }
        }
@@ -495,7 +493,7 @@ resume_3:
                { "name", "Name" },
                { "id", "ID" },
                { "scheme_name", "Scheme" },
-                { "used_for_app", "Used for app" },
+                { "used_for_fs", "Used for VitastorFS" },
                { "status", "Status" },
                { "backfillfull_fmt", "Backfillfull" },
                { "pg_count_fmt", "PGs" },
@@ -112,21 +112,19 @@ resume_1:
                return;
            }

-            if (new_cfg.find("used_for_app") != new_cfg.end() && !force)
+            if (new_cfg.find("used_for_fs") != new_cfg.end() && !force)
            {
                // Check that pool doesn't have images
                auto img_it = parent->cli->st_cli.inode_config.lower_bound(INODE_WITH_POOL(pool_id, 0));
-                if (img_it != parent->cli->st_cli.inode_config.end() &&
-                    INODE_POOL(img_it->first) == pool_id &&
-                    new_cfg["used_for_app"].string_value().substr(0, 3) == "fs:" &&
-                    img_it->second.name == new_cfg["used_for_app"].string_value().substr(3))
+                if (img_it != parent->cli->st_cli.inode_config.end() && INODE_POOL(img_it->first) == pool_id &&
+                    img_it->second.name == new_cfg["used_for_fs"].string_value())
                {
                    // Only allow metadata image to exist in the FS pool
                    img_it++;
                }
                if (img_it != parent->cli->st_cli.inode_config.end() && INODE_POOL(img_it->first) == pool_id)
                {
-                    result = (cli_result_t){ .err = ENOENT, .text = "Pool "+pool_name+" has block images, delete them before using it for VitastorFS, S3 or another app" };
+                    result = (cli_result_t){ .err = ENOENT, .text = "Pool "+pool_name+" has block images, delete them before using it for VitastorFS" };
                    state = 100;
                    return;
                }
@@ -69,11 +69,11 @@ struct rm_inode_t
                });
                if (min_offset == 0 && max_offset == 0)
                {
-                    total_count += rm->objects.size();
+                    total_count += objects.size();
                }
                else
                {
-                    for (object_id oid: rm->objects)
+                    for (object_id oid: objects)
                    {
                        if (oid.stripe >= min_offset && (!max_offset || oid.stripe < max_offset))
                        {
@@ -5,7 +5,7 @@ project(vitastor)
 # vitastor-disk
 add_executable(vitastor-disk
 	disk_tool.cpp disk_simple_offsets.cpp
-	disk_tool_discard.cpp disk_tool_journal.cpp disk_tool_meta.cpp disk_tool_prepare.cpp disk_tool_resize.cpp
+	disk_tool_journal.cpp disk_tool_meta.cpp disk_tool_prepare.cpp disk_tool_resize.cpp
 	disk_tool_resize_auto.cpp disk_tool_udev.cpp disk_tool_utils.cpp disk_tool_upgrade.cpp
 	../util/crc32c.c ../util/str_util.cpp ../util/json_util.cpp ../../json11/json11.cpp ../util/rw_blocking.cpp ../util/allocator.cpp ../util/ringloop.cpp ../blockstore/blockstore_disk.cpp
 )
@@ -68,8 +68,6 @@ static const char *help_text =
    "    --data_device_block 4k     Override data device block size\n"
    "    --meta_device_block 4k     Override metadata device block size\n"
    "    --journal_device_block 4k  Override journal device block size\n"
-    "    --discard_on_start 0       TRIM unused data device blocks every OSD start (default off)\n"
-    "    --min_discard_size 1M      Minimum TRIM block size\n"
    "    --json                     Enable JSON output\n"
    "  \n"
    "  immediate_commit setting is automatically derived from \"disable fsync\" options.\n"
@@ -130,12 +128,6 @@ static const char *help_text =
    "  SIZE may include k/m/g/t suffixes. If any of the new layout parameter\n"
    "  options are not specified, old values will be used.\n"
    "\n"
-    "vitastor-disk trim <osd_num>|<osd_device> [<osd_num>|<osd_device>...]\n"
-    "  Try to discard unused blocks (SSD TRIM) on the data device of each of the OSD(s).\n"
-    "  May only be used on stopped OSDs. Options:\n"
-    "    --min_discard_size 1M      Minimum TRIM block size\n"
-    "    --discard_granularity 0    Override device's discard granularity\n"
-    "\n"
    "vitastor-disk start|stop|restart|enable|disable [--now] <device> [device2 device3 ...]\n"
    "  Manipulate Vitastor OSDs using systemd by their device paths.\n"
    "  Commands are passed to systemctl with vitastor-osd@<num> units as arguments.\n"
@@ -436,19 +428,6 @@ int main(int argc, char *argv[])
        disk_tool_simple_offsets(self.options, self.json);
        return 0;
    }
-    else if (!strcmp(cmd[0], "trim"))
-    {
-        if (cmd.size() < 2)
-        {
-            fprintf(stderr, "OSD number(s) or device path(s) are required\n");
-            return 1;
-        }
-        for (int i = 1; i < cmd.size(); i++)
-        {
-            self.trim_data(cmd[i]);
-        }
-        return 0;
-    }
    else if (!strcmp(cmd[0], "udev"))
    {
        if (cmd.size() != 2)
@@ -60,7 +60,7 @@ struct disk_tool_t

    bool first_block, first_entry;

-    allocator_t *data_alloc;
+    allocator *data_alloc;
    std::map<uint64_t, uint64_t> data_remap;
    std::map<uint64_t, uint64_t>::iterator remap_it;
    ring_loop_t *ringloop;
@@ -86,10 +86,10 @@ struct disk_tool_t

    int dump_journal();
    void dump_journal_entry(int num, journal_entry *je, bool json);
-    int process_journal(std::function<int(void*)> block_fn, bool do_open = true);
+    int process_journal(std::function<int(void*)> block_fn);
    int process_journal_block(void *buf, std::function<void(int, journal_entry*)> iter_fn);
    int process_meta(std::function<void(blockstore_meta_header_v2_t *)> hdr_fn,
-        std::function<void(uint64_t, clean_disk_entry*, uint8_t*)> record_fn, bool do_open = true);
+        std::function<void(uint64_t, clean_disk_entry*, uint8_t*)> record_fn);

    int dump_meta();
    void dump_meta_header(blockstore_meta_header_v2_t *hdr);
@@ -123,7 +123,6 @@ struct disk_tool_t
    int pre_exec_osd(std::string device);
    int purge_devices(const std::vector<std::string> & devices);
    int clear_osd_superblock(const std::string & dev);
-    int trim_data(std::string device);

    json11::Json read_osd_superblock(std::string device, bool expect_exist = true, bool ignore_nonref = false);
    uint32_t write_osd_superblock(std::string device, json11::Json params);
@@ -1,89 +0,0 @@
-// Copyright (c) Vitaliy Filippov, 2019+
-// License: VNPL-1.1 (see README.md for details)
-
-#include "disk_tool.h"
-#include "str_util.h"
-#include "json_util.h"
-
-int disk_tool_t::trim_data(std::string device)
-{
-    int r;
-    // Parse parameters
-    if (stoull_full(device))
-        device = "/dev/vitastor/osd"+device+"-data";
-    json11::Json sb = read_osd_superblock(device, true, false);
-    if (sb.is_null())
-        return 1;
-    auto sb_params = json_to_string_map(sb["params"].object_items());
-    if (options["discard_granularity"] != "")
-        sb_params["discard_granularity"] = options["discard_granularity"];
-    if (options["min_discard_size"] != "")
-        sb_params["min_discard_size"] = options["min_discard_size"];
-    try
-    {
-        dsk.parse_config(sb_params);
-    }
-    catch (std::exception & e)
-    {
-        fprintf(stderr, "Error: %s\n", e.what());
-        return 1;
-    }
-    if (!dsk.discard_granularity && sb["real_data_device"].string_value().substr(0, 5) == "/dev/")
-    {
-        auto dg = read_file("/sys/block/"+sb["real_data_device"].string_value().substr(5)+"/queue/discard_granularity", true);
-        if (dg != "")
-            dsk.discard_granularity = parse_size(trim(dg));
-    }
-    // Open devices
-    try
-    {
-        if (options["io"] != "")
-            dsk.data_io = dsk.meta_io = dsk.journal_io = options["io"];
-        dsk.open_data();
-        dsk.open_meta();
-        dsk.open_journal();
-        dsk.calc_lengths();
-    }
-    catch (std::exception & e)
-    {
-        dsk.close_all();
-        fprintf(stderr, "Error: %s\n", e.what());
-        return 1;
-    }
-    // Fill allocator
-    fprintf(stderr, "Reading metadata\n");
-    data_alloc = new allocator_t(dsk.block_count);
-    r = process_meta(
-        [this](blockstore_meta_header_v2_t *hdr) {},
-        [this](uint64_t block_num, clean_disk_entry *entry, uint8_t *bitmap)
-        {
-            data_alloc->set(block_num, true);
-        },
-        false
-    );
-    if (r != 0)
-    {
-        dsk.close_all();
-        return r;
-    }
-    fprintf(stderr, "Reading journal\n");
-    r = process_journal([this](void *buf)
-    {
-        return process_journal_block(buf, [this](int num, journal_entry *je)
-        {
-            if (je->type == JE_BIG_WRITE || je->type == JE_BIG_WRITE_INSTANT)
-            {
-                data_alloc->set(je->big_write.location / dsk.data_block_size, true);
-            }
-        });
-    }, false);
-    if (r != 0)
-    {
-        dsk.close_all();
-        return r;
-    }
-    // Trim
-    r = dsk.trim_data(data_alloc);
-    dsk.close_all();
-    return r == 0;
-}
@@ -119,21 +119,13 @@ int disk_tool_t::dump_journal()
    return 0;
 }

-int disk_tool_t::process_journal(std::function<int(void*)> block_fn, bool do_open)
+int disk_tool_t::process_journal(std::function<int(void*)> block_fn)
 {
-    if (do_open)
+    dsk.journal_fd = open(dsk.journal_device.c_str(), (options["io"] == "cached" ? 0 : O_DIRECT) | O_RDONLY);
+    if (dsk.journal_fd < 0)
    {
-        if (dsk.journal_fd >= 0)
-        {
-            fprintf(stderr, "Bug: journal device is already opened\n");
-            return 1;
-        }
-        dsk.journal_fd = open(dsk.journal_device.c_str(), (options["io"] == "cached" ? 0 : O_DIRECT) | O_RDONLY);
-        if (dsk.journal_fd < 0)
-        {
-            fprintf(stderr, "Failed to open journal device %s: %s\n", dsk.journal_device.c_str(), strerror(errno));
-            return 1;
-        }
+        fprintf(stderr, "Failed to open journal device %s: %s\n", dsk.journal_device.c_str(), strerror(errno));
+        return 1;
    }
    void *data = memalign_or_die(MEM_ALIGNMENT, dsk.journal_block_size);
    journal_pos = 0;
@@ -178,11 +170,8 @@ int disk_tool_t::process_journal(std::function<int(void*)> block_fn, bool do_ope
                break;
        }
    }
-    if (do_open)
-    {
-        close(dsk.journal_fd);
-        dsk.journal_fd = -1;
-    }
+    close(dsk.journal_fd);
+    dsk.journal_fd = -1;
    free(data);
    return r;
 }
@@ -7,26 +7,18 @@
 #include "json_util.h"

 int disk_tool_t::process_meta(std::function<void(blockstore_meta_header_v2_t *)> hdr_fn,
-    std::function<void(uint64_t, clean_disk_entry*, uint8_t*)> record_fn, bool do_open)
+    std::function<void(uint64_t, clean_disk_entry*, uint8_t*)> record_fn)
 {
    if (dsk.meta_block_size % DIRECT_IO_ALIGNMENT)
    {
        fprintf(stderr, "Invalid metadata block size: is not a multiple of %d\n", DIRECT_IO_ALIGNMENT);
        return 1;
    }
-    if (do_open)
+    dsk.meta_fd = open(dsk.meta_device.c_str(), (options["io"] == "cached" ? 0 : O_DIRECT) | O_RDONLY);
+    if (dsk.meta_fd < 0)
    {
-        if (dsk.meta_fd >= 0)
-        {
-            fprintf(stderr, "Bug: Metadata device is already opened\n");
-            return 1;
-        }
-        dsk.meta_fd = open(dsk.meta_device.c_str(), (options["io"] == "cached" ? 0 : O_DIRECT) | O_RDONLY);
-        if (dsk.meta_fd < 0)
-        {
-            fprintf(stderr, "Failed to open metadata device %s: %s\n", dsk.meta_device.c_str(), strerror(errno));
-            return 1;
-        }
+        fprintf(stderr, "Failed to open metadata device %s: %s\n", dsk.meta_device.c_str(), strerror(errno));
+        return 1;
    }
    int buf_size = 1024*1024;
    if (buf_size % dsk.meta_block_size)
@@ -55,11 +47,8 @@ int disk_tool_t::process_meta(std::function<void(blockstore_meta_header_v2_t *)>
            {
                fprintf(stderr, "I don't know checksum format %u, the only supported format is crc32c = %u.\n", hdr->data_csum_type, BLOCKSTORE_CSUM_CRC32C);
                free(data);
-                if (do_open)
-                {
-                    close(dsk.meta_fd);
-                    dsk.meta_fd = -1;
-                }
+                close(dsk.meta_fd);
+                dsk.meta_fd = -1;
                return 1;
            }
        }
@@ -68,11 +57,8 @@ int disk_tool_t::process_meta(std::function<void(blockstore_meta_header_v2_t *)>
            // Unsupported version
            fprintf(stderr, "Metadata format is too new for me (stored version is %ju, max supported %u).\n", hdr->version, BLOCKSTORE_META_FORMAT_V2);
            free(data);
-            if (do_open)
-            {
-                close(dsk.meta_fd);
-                dsk.meta_fd = -1;
-            }
+            close(dsk.meta_fd);
+            dsk.meta_fd = -1;
            return 1;
        }
        if (hdr->meta_block_size != dsk.meta_block_size)
@@ -159,11 +145,8 @@ int disk_tool_t::process_meta(std::function<void(blockstore_meta_header_v2_t *)>
        }
    }
    free(data);
-    if (do_open)
-    {
-        close(dsk.meta_fd);
-        dsk.meta_fd = -1;
-    }
+    close(dsk.meta_fd);
+    dsk.meta_fd = -1;
    return 0;
 }

@@ -26,9 +26,6 @@ int disk_tool_t::prepare_one(std::map<std::string, std::string> options, int is_
        "throttle_target_mbs",
        "throttle_target_parallelism",
        "throttle_threshold_us",
-        "discard_on_start",
-        "min_discard_size",
-        "discard_granularity",
    };
    if (options.find("force") == options.end())
    {
@@ -25,9 +25,9 @@ int disk_tool_t::raw_resize()
    r = resize_parse_params();
    if (r != 0)
        return r;
-    // Fill allocator
+    // Check parameters and fill allocator
    fprintf(stderr, "Reading metadata\n");
-    data_alloc = new allocator_t((new_data_len < dsk.data_len ? dsk.data_len : new_data_len) / dsk.data_block_size);
+    data_alloc = new allocator((new_data_len < dsk.data_len ? dsk.data_len : new_data_len) / dsk.data_block_size);
    r = process_meta(
        [this](blockstore_meta_header_v2_t *hdr)
        {
@@ -79,59 +79,28 @@ int disk_tool_t::upgrade_simple_unit(std::string unit)
    {
        // Resize data
        uint64_t blk = stoull_full(options["block_size"]);
-        blk = blk ? blk : (1 << DEFAULT_DATA_BLOCK_ORDER);
+        blk = blk ? blk : 128*1024;
        std::map<std::string, uint64_t> resize;
        if (d_o < 4096 || m_is_d && m_o < 4096 && m_o < d_o || j_is_d && j_o < 4096 && j_o < d_o)
        {
-            d_o += blk;
+            resize["new_data_offset"] = d_o+blk;
            if (m_is_d && m_o < d_o)
-                m_o += blk;
+                resize["new_meta_offset"] = m_o+blk;
            if (j_is_d && j_o < d_o)
-                j_o += blk;
+                resize["new_journal_offset"] = j_o+blk;
        }
        if (!m_is_d && m_o < 4096)
        {
-            m_o += 4096;
+            resize["new_meta_offset"] = m_o+4096;
            if (j_is_m && m_o < j_o)
-                j_o += 4096;
+                resize["new_journal_offset"] = j_o+4096;
        }
        if (!j_is_d && !j_is_m && j_o < 4096)
-            j_o += 4096;
-        if (options["meta_format"] == "" || options["meta_format"] == "1")
-        {
-            blockstore_disk_t dsk;
-            options["meta_format"] = std::to_string(BLOCKSTORE_META_FORMAT_V2);
-            try
-            {
-                dsk.parse_config(options);
-                dsk.open_data();
-                dsk.open_meta();
-                dsk.open_journal();
-                dsk.calc_lengths(true);
-                dsk.close_all();
-            }
-            catch (std::exception & e)
-            {
-                dsk.close_all();
-                fprintf(stderr, "Error: %s\n", e.what());
-                return 1;
-            }
-            options.erase("meta_format");
-            if (m_is_d && m_o < d_o && d_o-m_o < dsk.meta_len)
-                d_o += ((dsk.meta_len - (d_o-m_o) + blk-1) / blk) * blk;
-        }
-        resize["new_data_offset"] = d_o;
-        resize["new_meta_offset"] = m_o;
-        resize["new_journal_offset"] = j_o;
+            resize["new_journal_offset"] = j_o+4096;
        disk_tool_t resizer;
        resizer.options = options;
        for (auto & kv: resize)
            resizer.options[kv.first] = std::to_string(kv.second);
-        std::string cmd;
-        for (auto & kv: resizer.options)
-            if (kv.second != "")
-                cmd += "  "+kv.first+" = "+kv.second+"\n";
-        fprintf(stderr, "Running resize:\n%s", cmd.c_str());
        if (resizer.raw_resize() != 0)
        {
            // FIXME: Resize with backup or journal
@@ -245,10 +245,10 @@ void kv_fs_state_t::init(nfs_proxy_t *proxy, json11::Json cfg)
    if (proxy->cli->st_cli.inode_config.find(fs_kv_inode) != proxy->cli->st_cli.inode_config.end())
    {
        auto & name = proxy->cli->st_cli.inode_config.at(fs_kv_inode).name;
-        if (pool_cfg.used_for_app != "fs:"+name)
+        if (pool_cfg.used_for_fs != name)
        {
-            fprintf(stderr, "Please mark pool as used for this file system with `vitastor-cli modify-pool --used-for-app fs:%s %s`\n",
-                name.c_str(), pool_cfg.name.c_str());
+            fprintf(stderr, "Please mark pool as used for this file system with `vitastor-cli modify-pool --used-for-fs %s %s`\n",
+                name.c_str(), cfg["fs"].string_value().c_str());
            exit(1);
        }
    }
@@ -673,7 +673,7 @@ void osd_t::apply_no_inode_stats()
    std::vector<uint64_t> no_inode_stats;
    for (auto & pool_item: st_cli.pool_config)
    {
-        if (!pool_item.second.used_for_app.empty())
+        if (!pool_item.second.used_for_fs.empty())
        {
            no_inode_stats.push_back(pool_item.first);
        }
@@ -722,58 +722,54 @@ resume_3:
        cur_op->reply.rw.version = op_data->fact_ver;
        goto continue_others;
    }
-    // If not already deleted:
-    if (op_data->fact_ver)
-    {
-        // Save version override for parallel reads
-        pg.ver_override[op_data->oid] = op_data->fact_ver;
-        // Submit deletes
-        op_data->fact_ver++;
-        submit_primary_del_subops(cur_op, NULL, 0, op_data->object_state ? op_data->object_state->osd_set : pg.cur_loc_set);
+    // Save version override for parallel reads
+    pg.ver_override[op_data->oid] = op_data->fact_ver;
+    // Submit deletes
+    op_data->fact_ver++;
+    submit_primary_del_subops(cur_op, NULL, 0, op_data->object_state ? op_data->object_state->osd_set : pg.cur_loc_set);
 resume_4:
-        op_data->st = 4;
-        return;
+    op_data->st = 4;
+    return;
 resume_5:
-        if (op_data->errors > 0)
-        {
-            deref_object_state(pg, &op_data->object_state, true);
-            pg_cancel_write_queue(pg, cur_op, op_data->oid, op_data->errcode);
-            return;
-        }
-        // Remove version override
-        pg.ver_override.erase(op_data->oid);
-        // Adjust PG stats after "instant stabilize", because we need object_state above
-        if (!op_data->object_state)
-        {
-            pg.clean_count--;
-        }
-        else
-        {
-            remove_object_from_state(op_data->oid, &op_data->object_state, pg);
-            deref_object_state(pg, &op_data->object_state, true);
-        }
-        // Mark PG and OSDs as dirty
-        for (auto & chunk: (op_data->object_state ? op_data->object_state->osd_set : pg.cur_loc_set))
-        {
-            this->dirty_osds.insert(chunk.osd_num);
-        }
-        for (auto cl_it = msgr.clients.find(cur_op->peer_fd); cl_it != msgr.clients.end(); )
-        {
-            cl_it->second->dirty_pgs.insert({ .pool_id = pg.pool_id, .pg_num = pg.pg_num });
-            break;
-        }
-        dirty_pgs.insert({ .pool_id = pg.pool_id, .pg_num = pg.pg_num });
-        if (immediate_commit == IMMEDIATE_NONE)
-        {
-            unstable_write_count++;
-            if (unstable_write_count >= autosync_writes)
-            {
-                unstable_write_count = 0;
-                autosync();
-            }
-        }
-        pg.total_count--;
+    if (op_data->errors > 0)
+    {
+        deref_object_state(pg, &op_data->object_state, true);
+        pg_cancel_write_queue(pg, cur_op, op_data->oid, op_data->errcode);
+        return;
    }
+    // Remove version override
+    pg.ver_override.erase(op_data->oid);
+    // Adjust PG stats after "instant stabilize", because we need object_state above
+    if (!op_data->object_state)
+    {
+        pg.clean_count--;
+    }
+    else
+    {
+        remove_object_from_state(op_data->oid, &op_data->object_state, pg);
+        deref_object_state(pg, &op_data->object_state, true);
+    }
+    // Mark PG and OSDs as dirty
+    for (auto & chunk: (op_data->object_state ? op_data->object_state->osd_set : pg.cur_loc_set))
+    {
+        this->dirty_osds.insert(chunk.osd_num);
+    }
+    for (auto cl_it = msgr.clients.find(cur_op->peer_fd); cl_it != msgr.clients.end(); )
+    {
+        cl_it->second->dirty_pgs.insert({ .pool_id = pg.pool_id, .pg_num = pg.pg_num });
+        break;
+    }
+    dirty_pgs.insert({ .pool_id = pg.pool_id, .pg_num = pg.pg_num });
+    if (immediate_commit == IMMEDIATE_NONE)
+    {
+        unstable_write_count++;
+        if (unstable_write_count >= autosync_writes)
+        {
+            unstable_write_count = 0;
+            autosync();
+        }
+    }
+    pg.total_count--;
    cur_op->reply.hdr.retval = 0;
    // indicate possibly unfinished (left_on_dead) deletions
    cur_op->reply.del.flags = OSD_DEL_SUPPORT_LEFT_ON_DEAD;
@@ -7,7 +7,7 @@

 void alloc_all(int size)
 {
-    allocator_t *a = new allocator_t(size);
+    allocator *a = new allocator(size);
    for (int i = 0; i < size; i++)
    {
        uint64_t x = a->find_free();
@@ -7,7 +7,7 @@
 #include <stdlib.h>
 #include <malloc.h>

-allocator_t::allocator_t(uint64_t blocks)
+allocator::allocator(uint64_t blocks)
 {
    if (blocks >= 0x80000000 || blocks <= 1)
    {
@@ -32,12 +32,12 @@ allocator_t::allocator_t(uint64_t blocks)
    }
 }

-allocator_t::~allocator_t()
+allocator::~allocator()
 {
    delete[] mask;
 }

-bool allocator_t::get(uint64_t addr)
+bool allocator::get(uint64_t addr)
 {
    if (addr >= size)
    {
@@ -52,7 +52,7 @@ bool allocator_t::get(uint64_t addr)
    return ((mask[offset + addr/64] >> (addr % 64)) & 1);
 }

-void allocator_t::set(uint64_t addr, bool value)
+void allocator::set(uint64_t addr, bool value)
 {
    if (addr >= size)
    {
@@ -109,7 +109,7 @@ void allocator_t::set(uint64_t addr, bool value)
    }
 }

-uint64_t allocator_t::find_free()
+uint64_t allocator::find_free()
 {
    uint64_t p2 = 1, offset = 0, addr = 0, f, i;
    while (p2 < size)
@@ -138,7 +138,7 @@ uint64_t allocator_t::find_free()
    return addr;
 }

-uint64_t allocator_t::get_free_count()
+uint64_t allocator::get_free_count()
 {
    return free;
 }
@@ -6,7 +6,7 @@
 #include <stdint.h>

 // Hierarchical bitmap allocator
-class allocator_t
+class allocator
 {
    uint64_t total;
    uint64_t size;
@@ -14,8 +14,8 @@ class allocator_t
    uint64_t last_one_mask;
    uint64_t *mask;
 public:
-    allocator_t(uint64_t blocks);
-    ~allocator_t();
+    allocator(uint64_t blocks);
+    ~allocator();
    bool get(uint64_t addr);
    void set(uint64_t addr, bool value);
    uint64_t find_free();
@@ -131,6 +131,17 @@ void ring_loop_t::loop()
        }
        io_uring_cqe_seen(&ring, cqe);
    }
+    in_loop = false;
+    loop_continue();
+}
+
+void ring_loop_t::loop_continue()
+{
+    if (in_loop)
+    {
+        return;
+    }
+    in_loop = true;
    do
    {
        loop_again = false;
@@ -165,6 +165,7 @@ public:
    }

    void loop();
+    void loop_continue();
    void wakeup();

    unsigned save();
@@ -4,7 +4,7 @@ PG_COUNT=16
 . `dirname $0`/run_3osds.sh

 build/src/cmd/vitastor-cli --etcd_address $ETCD_URL create -s 10G fsmeta
-build/src/cmd/vitastor-cli --etcd_address $ETCD_URL modify-pool --used-for-app fs:fsmeta testpool
+build/src/cmd/vitastor-cli --etcd_address $ETCD_URL modify-pool --used-for-fs fsmeta testpool
 build/src/nfs/vitastor-nfs start --fs fsmeta --etcd_address $ETCD_URL --portmap 0 --port 2050 --foreground 1 --trace 1 >>./testdata/nfs.log 2>&1 &
 NFS_PID=$!