Release 3.0.6

- Fix one more bug in old store checksums O_o - checksum verification wasn't
  working correctly on reads quickly after small initial offsetted writes
  (when a BIG_WRITE was read from the journal).
- Fix clients possibly not destroyed after being switched to RDMA. Not 100%
  verified, but in theory it could rarely lead to PGs hanging in peering/stopping
  states with RDMA enabled.
- Use vitastor-cli in the Cinder driver for modifications instead of direct etcd
  interaction.
- Fix mon_https_ca parsing.
- Fix Docker install.sh, add instructions for Podman.

CMakeLists.txt

@@ -2,7 +2,7 @@ cmake_minimum_required(VERSION 2.8.12)
 
 project(vitastor)
 
-set(VITASTOR_VERSION "3.0.5")
+set(VITASTOR_VERSION "3.0.6")
 
 include(CTest)
 

csi/Makefile

@@ -1,4 +1,4 @@
-VITASTOR_VERSION ?= v3.0.5
+VITASTOR_VERSION ?= v3.0.6
 
 all: build push
 

csi/deploy/004-csi-nodeplugin.yaml

@@ -49,7 +49,7 @@ spec:
             capabilities:
               add: ["SYS_ADMIN"]
             allowPrivilegeEscalation: true
-          image: vitalif/vitastor-csi:v3.0.5
+          image: vitalif/vitastor-csi:v3.0.6
           args:
             - "--node=$(NODE_ID)"
             - "--endpoint=$(CSI_ENDPOINT)"

csi/deploy/007-csi-provisioner.yaml

@@ -121,7 +121,7 @@ spec:
             privileged: true
             capabilities:
               add: ["SYS_ADMIN"]
-          image: vitalif/vitastor-csi:v3.0.5
+          image: vitalif/vitastor-csi:v3.0.6
           args:
             - "--node=$(NODE_ID)"
             - "--endpoint=$(CSI_ENDPOINT)"

csi/src/config.go

@@ -5,7 +5,7 @@ package vitastor
 
 const (
     vitastorCSIDriverName    = "csi.vitastor.io"
-    vitastorCSIDriverVersion = "3.0.5"
+    vitastorCSIDriverVersion = "3.0.6"
 )
 
 // Config struct fills the parameters of request or user input

debian/changelog

@@ -1,4 +1,4 @@
-vitastor (3.0.5-1) unstable; urgency=medium
+vitastor (3.0.6-1) unstable; urgency=medium
 
   * Bugfixes
 

docker/Makefile

@@ -1,4 +1,4 @@
-VITASTOR_VERSION ?= v3.0.5
+VITASTOR_VERSION ?= v3.0.6
 
 all: build push
 

docker/etc/systemd/system/vitastor-host.service

@@ -7,7 +7,7 @@ PartOf=vitastor.target
 [Service]
 Restart=always
 EnvironmentFile=/etc/vitastor/docker.conf
-ExecStart=bash -c 'docker run --rm -i -v /etc/vitastor:/etc/vitastor -v /dev:/dev -v /run:/run \
+ExecStart=bash -c 'docker run --rm -i -v /etc/vitastor:/etc/vitastor -v /dev:/dev -v /run:/run -e SYSTEMD_IN_CHROOT=0 \
     --security-opt seccomp=unconfined --privileged --pid=host --log-driver none --network host --name vitastor vitastor:$VITASTOR_VERSION \
     sleep.sh'
 ExecStartPost=udevadm trigger

docker/etc/vitastor/docker.conf

@@ -4,7 +4,7 @@
 #
 
 # Desired Vitastor version
-VITASTOR_VERSION=v3.0.5
+VITASTOR_VERSION=v3.0.6
 
 # Additional arguments for all containers
 # For example, you may want to specify a custom logging driver here

docker/install.sh

@@ -2,8 +2,7 @@
 
 set -e
 
-cp -urv /etc/default /host-etc/
-cp -urv /etc/systemd /host-etc/
-cp -urv /etc/udev /host-etc/
+cp -urv /etc/systemd/system/vitastor* /host-etc/systemd/system/
+cp -urv /etc/udev/rules.d /host-etc/udev/
 cp -urnv /etc/vitastor /host-etc/
 cp -urnv /opt/scripts/* /host-bin/

docs/installation/docker.en.md

@@ -26,13 +26,37 @@ at Vitastor Kubernetes operator: https://github.com/Antilles7227/vitastor-operat
 The instruction is very simple.
 
 1. Download a Docker image of the desired version: \
-   `docker pull vitalif/vitastor:v3.0.5`
+   `docker pull vitalif/vitastor:v3.0.6`
 2. Install scripts to the host system: \
-   `docker run --rm -it -v /etc:/host-etc -v /usr/bin:/host-bin vitalif/vitastor:v3.0.5 install.sh`
+   `docker run --rm -it -v /etc:/host-etc -v /usr/bin:/host-bin vitalif/vitastor:v3.0.6 install.sh`
 3. Reload udev rules: \
    `udevadm control --reload-rules`
+4. Enable the vitastor-host service: \
+   `systemctl enable --now vitastor-host`
 
-And you can return to [Quick Start](../intro/quickstart.en.md).
+After these steps, you can return to [Quick Start](../intro/quickstart.en.md).
+
+## Podman
+
+If you use Podman, run the following commands as root before installing Vitastor containers:
+
+```
+ln -s podman /usr/bin/docker
+
+mkdir -p /etc/systemd/system/systemd-udevd.service.d
+
+cat >/etc/systemd/system/systemd-udevd.service.d/override.conf <<EOF
+[Service]
+CapabilityBoundingSet=~
+SystemCallFilter=@mount capset
+EOF
+
+systemctl daemon-reload
+
+systemctl restart systemd-udevd
+```
+
+Without it, udev fails to do calls into a Podman container and Vitastor disk detection doesn't work.
 
 ## Upgrading Containers
 

docs/installation/docker.ru.md

@@ -25,14 +25,39 @@ Vitastor можно установить в Docker/Podman. При этом etcd,
 Инструкция по установке максимально простая.
 
 1. Скачайте Docker-образ желаемой версии: \
-   `docker pull vitalif/vitastor:v3.0.5`
+   `docker pull vitalif/vitastor:v3.0.6`
 2. Установите скрипты в хост-систему командой: \
-   `docker run --rm -it -v /etc:/host-etc -v /usr/bin:/host-bin vitalif/vitastor:v3.0.5 install.sh`
+   `docker run --rm -it -v /etc:/host-etc -v /usr/bin:/host-bin vitalif/vitastor:v3.0.6 install.sh`
 3. Перезагрузите правила udev: \
    `udevadm control --reload-rules`
+4. Включите сервис vitastor-host: \
+   `systemctl enable --now vitastor-host`
 
 После этого вы можете возвращаться к разделу [Быстрый старт](../intro/quickstart.ru.md).
 
+## Podman
+
+Если вы используете Podman, перед установкой контейнеров Vitastor выполните следующие
+команды от имени суперпользователя:
+
+```
+ln -s podman /usr/bin/docker
+
+mkdir -p /etc/systemd/system/systemd-udevd.service.d
+
+cat >/etc/systemd/system/systemd-udevd.service.d/override.conf <<EOF
+[Service]
+CapabilityBoundingSet=~
+SystemCallFilter=@mount capset
+EOF
+
+systemctl daemon-reload
+
+systemctl restart systemd-udevd
+```
+
+Без этих настроек udev не может делать вызовы внутрь Podman-контейнеров и определение дисков Vitastor не работает.
+
 ## Обновление контейнеров
 
 Сначала обязательно проверьте раздел [Обновление Vitastor](../usage/admin.ru.md#обновление-vitastor),

mon/http_server.js

@@ -16,7 +16,7 @@ async function create_http_server(cfg, handler)
         };
         if (cfg.mon_https_ca)
         {
-            tls.mon_https_ca = await fsp.readFile(cfg.mon_https_ca);
+            tls.ca = await fsp.readFile(cfg.mon_https_ca);
         }
         if (cfg.mon_https_client_auth)
         {

mon/package.json

@@ -1,6 +1,6 @@
 {
   "name": "vitastor-mon",
-  "version": "3.0.5",
+  "version": "3.0.6",
   "description": "Vitastor SDS monitor service",
   "main": "mon-main.js",
   "scripts": {

node-binding/package.json

@@ -1,6 +1,6 @@
 {
   "name": "vitastor",
-  "version": "3.0.5",
+  "version": "3.0.6",
   "description": "Low-level native bindings to Vitastor client library",
   "main": "index.js",
   "keywords": [

patches/cinder-vitastor.py

@@ -50,7 +50,7 @@ from cinder.volume import configuration
 from cinder.volume import driver
 from cinder.volume import volume_utils
 
-VITASTOR_VERSION = '3.0.5'
+VITASTOR_VERSION = '3.0.6'
 
 LOG = logging.getLogger(__name__)
 
@@ -275,7 +275,7 @@ class VitastorDriver(driver.CloneableImageVD,
             LOG.exception('error getting vitastor pool stats: '+str(e))
 
         self._stats = stats
-        
+
     def get_volume_stats(self, refresh=False):
         """Get volume stats.
         If 'refresh' is True, run update the stats first.
@@ -291,6 +291,14 @@ class VitastorDriver(driver.CloneableImageVD,
         else:
             return (1 + resp['kvs'][0]['value'], resp['kvs'][0]['mod_revision'])
 
+    def _cli(self, descr, *args):
+        args = [ 'vitastor-cli', *args, *(self._vitastor_args()) ]
+        try:
+            self._execute(*args)
+        except processutils.ProcessExecutionError as exc:
+            LOG.error("Failed to "+descr+": "+exc)
+            raise exception.VolumeBackendAPIException(data = exc.stderr)
+
     def create_volume(self, volume):
         """Creates a logical volume."""
 
@@ -302,7 +310,7 @@ class VitastorDriver(driver.CloneableImageVD,
 
         LOG.debug("creating volume '%s'", vol_name)
 
-        self._create_image(vol_name, { 'size': size })
+        self._cli('create volume', 'create', vol_name, '--size', size)
 
         if volume.encryption_key_id:
             self._create_encrypted_volume(volume, volume.obj_context)
@@ -346,7 +354,7 @@ class VitastorDriver(driver.CloneableImageVD,
         snap_name = utils.convert_str(snapshot.name)
         if snap_name.find('@') >= 0 or snap_name.find('/') >= 0:
             raise exception.VolumeBackendAPIException(data = '@ and / are forbidden in volume and snapshot names')
-        self._create_snapshot(vol_name, vol_name+'@'+snap_name)
+        self._cli('create snapshot', 'snap-create', vol_name+'@'+snap_name)
 
     def snapshot_revert_use_temp_snapshot(self):
         """Disable the use of a temporary snapshot on revert."""
@@ -359,21 +367,8 @@ class VitastorDriver(driver.CloneableImageVD,
         snap_name = utils.convert_str(snapshot.name)
 
         # Delete the image and recreate it from the snapshot
-        args = [ 'vitastor-cli', 'rm', vol_name, *(self._vitastor_args()) ]
-        try:
-            self._execute(*args)
-        except processutils.ProcessExecutionError as exc:
-            LOG.error("Failed to delete image "+vol_name+": "+exc)
-            raise exception.VolumeBackendAPIException(data = exc.stderr)
-        args = [
-            'vitastor-cli', 'create', '--parent', vol_name+'@'+snap_name,
-            vol_name, *(self._vitastor_args())
-        ]
-        try:
-            self._execute(*args)
-        except processutils.ProcessExecutionError as exc:
-            LOG.error("Failed to recreate image "+vol_name+" from "+vol_name+"@"+snap_name+": "+exc)
-            raise exception.VolumeBackendAPIException(data = exc.stderr)
+        self._cli('delete image', 'rm', vol_name)
+        self._cli('recreate image', 'create', '--parent', vol_name+'@'+snap_name, vol_name)
 
     def delete_snapshot(self, snapshot):
         """Deletes a snapshot."""
@@ -381,15 +376,7 @@ class VitastorDriver(driver.CloneableImageVD,
         vol_name = utils.convert_str(snapshot.volume_name)
         snap_name = utils.convert_str(snapshot.name)
 
-        args = [
-            'vitastor-cli', 'rm', vol_name+'@'+snap_name,
-            *(self._vitastor_args())
-        ]
-        try:
-            self._execute(*args)
-        except processutils.ProcessExecutionError as exc:
-            LOG.error("Failed to remove snapshot "+vol_name+'@'+snap_name+": "+exc)
-            raise exception.VolumeBackendAPIException(data = exc.stderr)
+        self._cli('remove snapshot', 'rm', vol_name+'@'+snap_name)
 
     def _child_count(self, parents):
         children = 0
@@ -427,13 +414,7 @@ class VitastorDriver(driver.CloneableImageVD,
         if src_vref.admin_metadata.get('readonly') == 'True':
             # source volume is a volume-image cache entry or other readonly volume
             # clone without intermediate snapshot
-            src = self._get_image(src_name)
-            LOG.debug("creating image '%s' from '%s'", dest_name, src_name)
-            new_cfg = self._create_image(dest_name, {
-                'size': size,
-                'parent_id': src['idx']['id'],
-                'parent_pool_id': src['idx']['pool_id'],
-            })
+            self._cli('create clone', 'create', '--parent', src_name, '--size', size, dest_name)
             return {}
 
         clone_snap = "%s@%s.clone_snap" % (src_name, dest_name)
@@ -446,15 +427,12 @@ class VitastorDriver(driver.CloneableImageVD,
             clone_snap = dest_name
             make_img = False
 
-        LOG.debug("creating layer '%s' under '%s'", clone_snap, src_name)
-        new_cfg = self._create_snapshot(src_name, clone_snap, True)
+        LOG.debug("creating snapshot '%s'", clone_snap)
+        self._cli('create base snapshot', 'snap-create', '--allow-existing', '1', clone_snap)
+
         if make_img:
             # Then create a clone from it
-            new_cfg = self._create_image(dest_name, {
-                'size': size,
-                'parent_id': new_cfg['parent_id'],
-                'parent_pool_id': new_cfg['parent_pool_id'],
-            })
+            self._cli('create clone', 'create', '--parent', clone_snap, '--size', size, dest_name)
 
         return {}
 
@@ -464,7 +442,8 @@ class VitastorDriver(driver.CloneableImageVD,
         vol_name = utils.convert_str(volume.name)
         snap_name = utils.convert_str(snapshot.name)
 
-        snap = self._get_image('volume-'+snapshot.volume_id+'@'+snap_name)
+        src_snap = 'volume-'+snapshot.volume_id+'@'+snap_name
+        snap = self._get_image(src_snap)
         if not snap:
             raise exception.SnapshotNotFound(snapshot_id = snap_name)
         snap_inode_id = int(resp['responses'][0]['kvs'][0]['value']['id'])
@@ -473,12 +452,8 @@ class VitastorDriver(driver.CloneableImageVD,
         size = snap['cfg']['size']
         if int(volume.size):
             size = int(volume.size) * units.Gi
-        new_cfg = self._create_image(vol_name, {
-            'size': size,
-            'parent_id': snap['idx']['id'],
-            'parent_pool_id': snap['idx']['pool_id'],
-        })
 
+        self._cli('create clone', 'create', vol_name, '--size', size, '--parent', src_snap)
         return {}
 
     def _vitastor_args(self):
@@ -505,49 +480,7 @@ class VitastorDriver(driver.CloneableImageVD,
         """Deletes a logical volume."""
 
         vol_name = utils.convert_str(volume.name)
-
-        # Find the volume and all its snapshots
-        range_end = b'index/image/' + vol_name.encode('utf-8')
-        range_end = range_end[0 : len(range_end)-1] + six.int2byte(range_end[len(range_end)-1] + 1)
-        resp = self._etcd_txn({ 'success': [
-            { 'request_range': { 'key': 'index/image/'+vol_name, 'range_end': range_end } },
-        ] })
-        if len(resp['responses'][0]['kvs']) == 0:
-            # already deleted
-            LOG.info("volume %s no longer exists in backend", vol_name)
-            return
-        layers = resp['responses'][0]['kvs']
-        layer_ids = {}
-        for kv in layers:
-            inode_id = int(kv['value']['id'])
-            pool_id = int(kv['value']['pool_id'])
-            inode_pool_id = (pool_id << 48) | (inode_id & 0xffffffffffff)
-            layer_ids[inode_pool_id] = True
-
-        # Check if the volume has clones and raise 'busy' if so
-        children = self._child_count(layer_ids)
-        if children > 0:
-            raise exception.VolumeIsBusy(volume_name = vol_name)
-
-        # Clear data
-        for kv in layers:
-            args = [
-                'vitastor-cli', 'rm-data', '--pool', str(kv['value']['pool_id']),
-                '--inode', str(kv['value']['id']), '--progress', '0',
-                *(self._vitastor_args())
-            ]
-            try:
-                self._execute(*args)
-            except processutils.ProcessExecutionError as exc:
-                LOG.error("Failed to remove layer "+kv['key']+": "+exc)
-                raise exception.VolumeBackendAPIException(data = exc.stderr)
-
-        # Delete all layers from etcd
-        requests = []
-        for kv in layers:
-            requests.append({ 'request_delete_range': { 'key': kv['key'] } })
-            requests.append({ 'request_delete_range': { 'key': 'config/inode/'+str(kv['value']['pool_id'])+'/'+str(kv['value']['id']) } })
-        self._etcd_txn({ 'success': requests })
+        self._cli('delete volume', 'rm', '--matching', vol_name, vol_name+'@*', '--progress', '0')
 
     def retype(self, context, volume, new_type, diff, host):
         """Change extra type specifications for a volume."""
@@ -567,98 +500,6 @@ class VitastorDriver(driver.CloneableImageVD,
         """Removes an export for a logical volume."""
         pass
 
-    def _create_image(self, vol_name, cfg):
-        pool_s = str(self.cfg['pool_id'])
-        image_id = 0
-        while image_id == 0:
-            # check if the image already exists and find a free ID
-            resp = self._etcd_txn({ 'success': [
-                { 'request_range': { 'key': 'index/image/'+vol_name } },
-                { 'request_range': { 'key': 'index/maxid/'+pool_s } },
-            ] })
-            if len(resp['responses'][0]['kvs']) > 0:
-                # already exists
-                raise exception.VolumeBackendAPIException(data = 'Volume '+vol_name+' already exists')
-            image_id, id_mod = self._next_id(resp['responses'][1])
-            # try to create the image
-            resp = self._etcd_txn({ 'compare': [
-                { 'target': 'MOD', 'mod_revision': id_mod, 'key': 'index/maxid/'+pool_s },
-                { 'target': 'VERSION', 'version': 0, 'key': 'index/image/'+vol_name },
-                { 'target': 'VERSION', 'version': 0, 'key': 'config/inode/'+pool_s+'/'+str(image_id) },
-            ], 'success': [
-                { 'request_put': { 'key': 'index/maxid/'+pool_s, 'value': image_id } },
-                { 'request_put': { 'key': 'index/image/'+vol_name, 'value': json.dumps({
-                    'id': image_id, 'pool_id': self.cfg['pool_id']
-                }) } },
-                { 'request_put': { 'key': 'config/inode/'+pool_s+'/'+str(image_id), 'value': json.dumps({
-                    **cfg, 'name': vol_name,
-                }) } },
-            ] })
-            if not resp.get('succeeded'):
-                # repeat
-                image_id = 0
-
-    def _create_snapshot(self, vol_name, snap_vol_name, allow_existing = False):
-        while True:
-            # check if the image already exists and snapshot doesn't
-            resp = self._etcd_txn({ 'success': [
-                { 'request_range': { 'key': 'index/image/'+vol_name } },
-                { 'request_range': { 'key': 'index/image/'+snap_vol_name } },
-            ] })
-            if len(resp['responses'][0]['kvs']) == 0:
-                raise exception.VolumeBackendAPIException(data = 'Volume '+vol_name+' does not exist')
-            if len(resp['responses'][1]['kvs']) > 0:
-                if allow_existing:
-                    snap_idx = resp['responses'][1]['kvs'][0]['value']
-                    resp = self._etcd_txn({ 'success': [
-                        { 'request_range': { 'key': 'config/inode/'+str(snap_idx['pool_id'])+'/'+str(snap_idx['id']) } },
-                    ] })
-                    if len(resp['responses'][0]['kvs']) == 0:
-                        raise exception.VolumeBackendAPIException(data =
-                            'Volume '+snap_vol_name+' is already indexed, but does not exist'
-                        )
-                    return resp['responses'][0]['kvs'][0]['value']
-                raise exception.VolumeBackendAPIException(
-                    data = 'Volume '+snap_vol_name+' already exists'
-                )
-            vol_idx = resp['responses'][0]['kvs'][0]['value']
-            vol_idx_mod = resp['responses'][0]['kvs'][0]['mod_revision']
-            # get image inode config and find a new ID
-            resp = self._etcd_txn({ 'success': [
-                { 'request_range': { 'key': 'config/inode/'+str(vol_idx['pool_id'])+'/'+str(vol_idx['id']) } },
-                { 'request_range': { 'key': 'index/maxid/'+str(self.cfg['pool_id']) } },
-            ] })
-            if len(resp['responses'][0]['kvs']) == 0:
-                raise exception.VolumeBackendAPIException(data = 'Volume '+vol_name+' does not exist')
-            vol_cfg = resp['responses'][0]['kvs'][0]['value']
-            vol_mod = resp['responses'][0]['kvs'][0]['mod_revision']
-            new_id, id_mod = self._next_id(resp['responses'][1])
-            # try to redirect image to the new inode
-            new_cfg = {
-                **vol_cfg, 'name': vol_name, 'parent_id': vol_idx['id'], 'parent_pool_id': vol_idx['pool_id']
-            }
-            resp = self._etcd_txn({ 'compare': [
-                { 'target': 'MOD', 'mod_revision': vol_idx_mod, 'key': 'index/image/'+vol_name },
-                { 'target': 'MOD', 'mod_revision': vol_mod, 'key': 'config/inode/'+str(vol_idx['pool_id'])+'/'+str(vol_idx['id']) },
-                { 'target': 'MOD', 'mod_revision': id_mod, 'key': 'index/maxid/'+str(self.cfg['pool_id']) },
-                { 'target': 'VERSION', 'version': 0, 'key': 'index/image/'+snap_vol_name },
-                { 'target': 'VERSION', 'version': 0, 'key': 'config/inode/'+str(self.cfg['pool_id'])+'/'+str(new_id) },
-            ], 'success': [
-                { 'request_put': { 'key': 'index/maxid/'+str(self.cfg['pool_id']), 'value': new_id } },
-                { 'request_put': { 'key': 'index/image/'+vol_name, 'value': json.dumps({
-                    'id': new_id, 'pool_id': self.cfg['pool_id']
-                }) } },
-                { 'request_put': { 'key': 'config/inode/'+str(self.cfg['pool_id'])+'/'+str(new_id), 'value': json.dumps(new_cfg) } },
-                { 'request_put': { 'key': 'index/image/'+snap_vol_name, 'value': json.dumps({
-                    'id': vol_idx['id'], 'pool_id': vol_idx['pool_id']
-                }) } },
-                { 'request_put': { 'key': 'config/inode/'+str(vol_idx['pool_id'])+'/'+str(vol_idx['id']), 'value': json.dumps({
-                    **vol_cfg, 'name': snap_vol_name, 'readonly': True
-                }) } }
-            ] })
-            if resp.get('succeeded'):
-                return new_cfg
-
     def initialize_connection(self, volume, connector):
         data = {
             'driver_volume_type': 'vitastor',
@@ -697,13 +538,9 @@ class VitastorDriver(driver.CloneableImageVD,
                     size = int(volume.size) * units.Gi
                     dest_name = utils.convert_str(volume.name)
                     # Find or create the base snapshot
-                    snap_cfg = self._create_snapshot(base_vol.name, base_vol.name+'@.clone_snap', True)
+                    self._cli('create base snapshot', 'create', '--allow-existing', '1', base_vol.name+'@.clone_snap')
                     # Then create a clone from it
-                    new_cfg = self._create_image(dest_name, {
-                        'size': size,
-                        'parent_id': snap_cfg['parent_id'],
-                        'parent_pool_id': snap_cfg['parent_pool_id'],
-                    })
+                    self._cli('create clone', 'create', dest_name, '--size', size, '--parent', base_vol.name+'@.clone_snap')
                     return ({}, True)
         return ({}, False)
 
@@ -770,26 +607,8 @@ class VitastorDriver(driver.CloneableImageVD,
     def extend_volume(self, volume, new_size):
         """Extend an existing volume."""
         vol_name = utils.convert_str(volume.name)
-        while True:
-            vol = self._get_image(vol_name)
-            if not vol:
-                raise exception.VolumeBackendAPIException(data = 'Volume '+vol_name+' does not exist')
-            # change size
-            size = int(new_size) * units.Gi
-            if size == vol['cfg']['size']:
-                break
-            resp = self._etcd_txn({ 'compare': [ {
-                'target': 'MOD',
-                'mod_revision': vol['cfg_mod'],
-                'key': 'config/inode/'+str(vol['idx']['pool_id'])+'/'+str(vol['idx']['id']),
-            } ], 'success': [
-                { 'request_put': {
-                    'key': 'config/inode/'+str(vol['idx']['pool_id'])+'/'+str(vol['idx']['id']),
-                    'value': json.dumps({ **vol['cfg'], 'size': size }),
-                } },
-            ] })
-            if resp.get('succeeded'):
-                break
+        size = int(new_size) * units.Gi
+        self._cli('extend volume', 'modify', vol_name, '--resize', new_size)
         LOG.debug(
             "Extend volume from %(old_size)s GB to %(new_size)s GB.",
             {'old_size': volume.size, 'new_size': new_size}
@@ -862,28 +681,7 @@ class VitastorDriver(driver.CloneableImageVD,
         """
         from_name = self._get_existing_name(existing_ref)
         to_name = utils.convert_str(volume.name)
-        self._rename(from_name, to_name)
-
-    def _rename(self, from_name, to_name):
-        while True:
-            vol = self._get_image(from_name)
-            if not vol:
-                raise exception.VolumeBackendAPIException(data = 'Volume '+from_name+' does not exist')
-            to = self._get_image(to_name)
-            if to:
-                raise exception.VolumeBackendAPIException(data = 'Volume '+to_name+' already exists')
-            resp = self._etcd_txn({ 'compare': [
-                { 'target': 'MOD', 'mod_revision': vol['idx_mod'], 'key': 'index/image/'+vol['cfg']['name'] },
-                { 'target': 'MOD', 'mod_revision': vol['cfg_mod'], 'key': 'config/inode/'+str(vol['idx']['pool_id'])+'/'+str(vol['idx']['id']) },
-                { 'target': 'VERSION', 'version': 0, 'key': 'index/image/'+to_name },
-            ], 'success': [
-                { 'request_delete_range': { 'key': 'index/image/'+vol['cfg']['name'] } },
-                { 'request_put': { 'key': 'index/image/'+to_name, 'value': json.dumps(vol['idx']) } },
-                { 'request_put': { 'key': 'config/inode/'+str(vol['idx']['pool_id'])+'/'+str(vol['idx']['id']),
-                    'value': json.dumps({ **vol['cfg'], 'name': to_name }) } },
-            ] })
-            if resp.get('succeeded'):
-                break
+        self._cli('rename', 'modify', from_name, '--rename', to_name)
 
     def unmanage(self, volume):
         pass
@@ -956,7 +754,7 @@ class VitastorDriver(driver.CloneableImageVD,
         snap_name = self._get_existing_name(existing_ref)
         from_name = vol_name+'@'+snap_name
         to_name = vol_name+'@'+utils.convert_str(snapshot.name)
-        self._rename(from_name, to_name)
+        self._cli('rename', 'modify', from_name, '--rename', to_name)
 
     def unmanage_snapshot(self, snapshot):
         """Removes the specified snapshot from Cinder management."""

rpm/vitastor-el10.spec

@@ -1,11 +1,11 @@
 Name:           vitastor
-Version:        3.0.5
+Version:        3.0.6
 Release:        1%{?dist}
 Summary:        Vitastor, a fast software-defined clustered block storage
 
 License:        Vitastor Network Public License 1.1
 URL:            https://vitastor.io/
-Source0:        vitastor-3.0.5.el10.tar.gz
+Source0:        vitastor-3.0.6.el10.tar.gz
 
 BuildRequires:  gperftools-devel
 BuildRequires:  gcc-c++

rpm/vitastor-el7.spec

@@ -1,11 +1,11 @@
 Name:           vitastor
-Version:        3.0.5
+Version:        3.0.6
 Release:        1%{?dist}
 Summary:        Vitastor, a fast software-defined clustered block storage
 
 License:        Vitastor Network Public License 1.1
 URL:            https://vitastor.io/
-Source0:        vitastor-3.0.5.el7.tar.gz
+Source0:        vitastor-3.0.6.el7.tar.gz
 
 BuildRequires:  gperftools-devel
 BuildRequires:  devtoolset-9-gcc-c++

rpm/vitastor-el8.spec

@@ -1,11 +1,11 @@
 Name:           vitastor
-Version:        3.0.5
+Version:        3.0.6
 Release:        1%{?dist}
 Summary:        Vitastor, a fast software-defined clustered block storage
 
 License:        Vitastor Network Public License 1.1
 URL:            https://vitastor.io/
-Source0:        vitastor-3.0.5.el8.tar.gz
+Source0:        vitastor-3.0.6.el8.tar.gz
 
 BuildRequires:  gperftools-devel
 BuildRequires:  gcc-toolset-9-gcc-c++

rpm/vitastor-el9.spec

@@ -1,11 +1,11 @@
 Name:           vitastor
-Version:        3.0.5
+Version:        3.0.6
 Release:        1%{?dist}
 Summary:        Vitastor, a fast software-defined clustered block storage
 
 License:        Vitastor Network Public License 1.1
 URL:            https://vitastor.io/
-Source0:        vitastor-3.0.5.el9.tar.gz
+Source0:        vitastor-3.0.6.el9.tar.gz
 
 BuildRequires:  gperftools-devel
 BuildRequires:  gcc-c++

src/CMakeLists.txt

@@ -21,7 +21,7 @@ if("${CMAKE_INSTALL_PREFIX}" MATCHES "^/usr/local/?$")
 endif()
 set(ENABLE_COVERAGE false CACHE BOOL "Enable code coverage")
 
-add_definitions(-DVITASTOR_VERSION="3.0.5")
+add_definitions(-DVITASTOR_VERSION="3.0.6")
 add_definitions(-D_GNU_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wno-sign-compare -Wno-comment -Wno-parentheses -Wno-pointer-arith -fdiagnostics-color=always -fno-omit-frame-pointer -fvisibility=hidden -I ${CMAKE_SOURCE_DIR}/src)
 add_link_options(-fno-omit-frame-pointer)
 if (${WITH_ASAN})

src/blockstore/v1/read.cpp

@@ -620,8 +620,7 @@ bool blockstore_impl_t::fulfill_clean_read(blockstore_op_t *read_op, uint64_t &
     else if (from_journal)
     {
         // Don't scan bitmap - journal writes don't have holes (internal bitmap)!
-        uint8_t *csum = !dsk.csum_block_size ? 0 : (clean_entry_bitmap + dsk.clean_entry_bitmap_size +
-            item_start/dsk.csum_block_size*(dsk.data_csum_type & 0xFF));
+        uint8_t *csum = !dsk.csum_block_size ? 0 : (clean_entry_bitmap + dsk.clean_entry_bitmap_size);
         if (!fulfill_read(read_op, fulfilled, item_start, item_end,
             (BS_ST_BIG_WRITE | BS_ST_STABLE), 0, clean_loc + item_start, 0, csum, dyn_data))
         {

src/client/messenger.cpp

@@ -739,14 +739,6 @@ void osd_messenger_t::check_peer_config(osd_client_t *cl)
                     fprintf(stderr, "Connected to OSD %ju using RDMA\n", cl->osd_num);
                 }
                 cl->peer_state = PEER_RDMA;
-                tfd->set_fd_handler(cl->peer_fd, false, [this](int peer_fd, int epoll_events)
-                {
-                    // Do not miss the disconnection!
-                    if (epoll_events & EPOLLRDHUP)
-                    {
-                        handle_peer_epoll(peer_fd, epoll_events);
-                    }
-                });
                 // Add the initial receive request
                 init_recv_rdma(cl);
             }

src/client/msgr_rdma.cpp

@@ -696,6 +696,10 @@ void osd_messenger_t::handle_rdma_events(msgr_rdma_context_t *rdma_context)
                 continue;
             }
             osd_client_t *cl = cl_it->second;
+            if (cl->peer_state == PEER_STOPPED)
+            {
+                continue;
+            }
             auto rc = cl->rdma_conn;
             if (wc[i].status != IBV_WC_SUCCESS)
             {

src/client/msgr_receive.cpp

@@ -9,7 +9,8 @@ void osd_messenger_t::read_requests()
     {
         int peer_fd = read_ready_clients[i];
         auto cl_it = clients.find(peer_fd);
-        if (cl_it == clients.end() || !cl_it->second || cl_it->second->read_msg.msg_iovlen)
+        if (cl_it == clients.end() || !cl_it->second || cl_it->second->read_msg.msg_iovlen ||
+            cl_it->second->peer_state == PEER_RDMA || cl_it->second->peer_state == PEER_RDMA_CONNECTING)
         {
             continue;
         }
@@ -75,6 +76,10 @@ bool osd_messenger_t::handle_read(int result, osd_client_t *cl)
     int peer_fd = cl->peer_fd;
     cl->read_msg.msg_iovlen = 0;
     cl->refs--;
+    if (cl->peer_state == PEER_RDMA)
+    {
+        return true;
+    }
     if (cl->peer_state == PEER_STOPPED)
     {
         if (cl->refs <= 0)

src/client/msgr_send.cpp

@@ -251,7 +251,7 @@ void osd_messenger_t::send_replies()
     {
         int peer_fd = write_ready_clients[i];
         auto cl_it = clients.find(peer_fd);
-        if (cl_it != clients.end() && !try_send(cl_it->second))
+        if (cl_it != clients.end() && cl_it->second->peer_state != PEER_RDMA && !try_send(cl_it->second))
         {
             write_ready_clients.erase(write_ready_clients.begin(), write_ready_clients.begin() + i);
             return;
@@ -349,21 +349,12 @@ void osd_messenger_t::handle_send(int result, bool prev, bool more, osd_client_t
 #ifdef WITH_RDMA
         if (cl->rdma_conn && !cl->outbox.size() && cl->peer_state == PEER_RDMA_CONNECTING)
         {
-            // FIXME: Do something better than just forgetting the FD
             // FIXME: Ignore pings during RDMA state transition
             if (log_level > 0)
             {
                 fprintf(stderr, "Successfully connected with client %d using RDMA\n", cl->peer_fd);
             }
             cl->peer_state = PEER_RDMA;
-            tfd->set_fd_handler(cl->peer_fd, false, [this](int peer_fd, int epoll_events)
-            {
-                // Do not miss the disconnection!
-                if (epoll_events & EPOLLRDHUP)
-                {
-                    handle_peer_epoll(peer_fd, epoll_events);
-                }
-            });
             // Add the initial receive request
             init_recv_rdma(cl);
         }

src/client/vitastor.pc.in

@@ -6,7 +6,7 @@ includedir=${prefix}/@CMAKE_INSTALL_INCLUDEDIR@
 
 Name: Vitastor
 Description: Vitastor client library
-Version: 3.0.5
+Version: 3.0.6
 Libs: -L${libdir} -lvitastor_client
 Cflags: -I${includedir}
 

src/util/str_util.cpp

@@ -96,7 +96,7 @@ std::string str_replace(const std::string & in, const std::string & needle, cons
     {
         res += in.substr(pos, p2-pos);
         res += replacement;
-        pos = p2 + replacement.size();
+        pos = p2 + needle.size();
     }
     if (!pos)
     {